SCJedi
In Bloom
I'm going to leave this here as a placeholder and will add other items. I would also consider adding 1-2 teaspoons of Isopropyl Alcohol to assist in miscibility as well as for contact dehydration.
**These oils are simple hydrocarbons that'll break down in the presence of light and oxygen think ( cannabinoids or terpenes ) so they dissipate within 24 hours of use and will not harm smells or flavors.**
***DO NOT USE WITHIN 2 HOURS OF LIGHTS TURNING ON***
When using the Essential Oils for the first time, use it at a dose of maybe 2mL per Gallon. If you up to 10mL the first time, the plants, which are not used to the oils, may get burned. Start low and work your way up.
IPM 1-1: Foliar Spray (PPT BY ANDREW GUALDI)
Container #1
2 Cup of Warm Water
1.5 tsp Potassium Silicate (emulsifier)
1 tsp Aloe Vera Extract 200x
Container #2
1 tbs Mixed Essential Oils (ex. Cinnamon, Clove, Rosemary, Thyme)*
1.5 tsp Neem Oil
1.5 tsp Karanja Oil
Container #3
1 Gallon of Warm Water (minus the 2 cups from Container #1)
Directions:
Mix Container #2 into Container #1
Stir, stir, stir
Dump into Container #3
Stir, Shake, Stir
Put into sprayer and use immediately
*Use up to 10 ml of mixed essential oils (usually 3 or 4 kinds):
Lavender
Cinnamon
Clove
Thyme
Rosemary (Melts mite eggs)
Citronella
Spearmint
Peppermint
Eucalyptus
How to Emulsify: Use a small glass bottle with a screw cap. Add neem oil, K Sil (potassium silicate), a bit of water at room temperature. Screw the cap on and just shake the bottle for a few mins. If oil droplets are still floating around, add a bit more ksil and repeat the process. When it's a nice even liquid of milky consistency, pour into sprayer, add water add a form of saponin and go to town.
Also you may use Yucca Extract as well as Dr. Bronner’s Soaps.
**These oils are simple hydrocarbons that'll break down in the presence of light and oxygen think ( cannabinoids or terpenes ) so they dissipate within 24 hours of use and will not harm smells or flavors.**
***DO NOT USE WITHIN 2 HOURS OF LIGHTS TURNING ON***
When using the Essential Oils for the first time, use it at a dose of maybe 2mL per Gallon. If you up to 10mL the first time, the plants, which are not used to the oils, may get burned. Start low and work your way up.
IPM 1-1: Foliar Spray (PPT BY ANDREW GUALDI)
Container #1
2 Cup of Warm Water
1.5 tsp Potassium Silicate (emulsifier)
1 tsp Aloe Vera Extract 200x
Container #2
1 tbs Mixed Essential Oils (ex. Cinnamon, Clove, Rosemary, Thyme)*
1.5 tsp Neem Oil
1.5 tsp Karanja Oil
Container #3
1 Gallon of Warm Water (minus the 2 cups from Container #1)
Directions:
Mix Container #2 into Container #1
Stir, stir, stir
Dump into Container #3
Stir, Shake, Stir
Put into sprayer and use immediately
*Use up to 10 ml of mixed essential oils (usually 3 or 4 kinds):
Lavender
Cinnamon
Clove
Thyme
Rosemary (Melts mite eggs)
Citronella
Spearmint
Peppermint
Eucalyptus
How to Emulsify: Use a small glass bottle with a screw cap. Add neem oil, K Sil (potassium silicate), a bit of water at room temperature. Screw the cap on and just shake the bottle for a few mins. If oil droplets are still floating around, add a bit more ksil and repeat the process. When it's a nice even liquid of milky consistency, pour into sprayer, add water add a form of saponin and go to town.
Also you may use Yucca Extract as well as Dr. Bronner’s Soaps.