Odor control for a 4x4 tent

Frimpong

🔥Freak Genetics🔥
I was gonna say the same thing frim said, my 6" rocks and it was cheap from amazon.
Wanna hear something cool. Well it's cool to me but I have a cheater fan hooked up to the 2*4 and it exhausts towards the 4*4 and gets sucked in. So basically I have two tents running on one 4 inch scrubber. Not once has anyone smelled anything I'm my home .
 

LittleDabbie

Extract Artist (BHO)
Wanna hear something cool. Well it's cool to me but I have a cheater fan hooked up to the 2*4 and it exhausts towards the 4*4 and gets sucked in. So basically I have two tents running on one 4 inch scrubber. Not once has anyone smelled anything I'm my home .


Yeah some people claim you need like 8" fans for fucing 4x4 tents.. no way.. these fuckin cans move way more air then most of these growers have any clue about and you can litterally put like 30 bends in the ducts and still exhaust a fuckin tent..

Good on you making the most of what you have! :D
 

Frimpong

🔥Freak Genetics🔥
Yeah some people claim you need like 8" fans for fucing 4x4 tents.. no way.. these fuckin cans move way more air then most of these growers have any clue about and you can litterally put like 30 bends in the ducts and still exhaust a fuckin tent..

Good on you making the most of what you have! :D
It was first an electricity issue I didn't want to add up too many watts. Then I realized I'm in a sealed room let's just have everything sucked back into the main tent. Plus I always have at least one scrubber ready incase it shits the bed
 

horribleherk

home grown
It was first an electricity issue I didn't want to add up too many watts. Then I realized I'm in a sealed room let's just have everything sucked back into the main tent. Plus I always have at least one scrubber ready incase it shits the bed
Yeah I'm gonna look on amazon as well as e-bay plan is to install here & have it ready I'm getting smell 2 houses down right now I blame it on the neighbors lol
Go with at least a 6" for a 4x4. My experience with a 4" ran and filter, is that it can't quite keep up in a 4x4 in the summer months. The filters don't really start getting expensive until you get into the 8" or bigger. Yeah I have a friend with the 8 in. it noisy like a shop vac
 

Capt. C

Saltwater Cowboy
Staff member
Moderator
That sounds pretty convincing looking at 2 of them now (6in) a 390 cfm & a 440 cfm the 390 is the quieter of the two price close to the same
@horribleherk don't forget those cfm numbers do not reflect a single pass rating which is usually about 50% of what the stated rating is. Example would be a filter rated at 400 cfm is only affective with a maximum of 200 cfm being pushed or pulled thru it if setting up as a single pass setup.
 

horribleherk

home grown
@horribleherk don't forget those cfm numbers do not reflect a single pass rating which is usually about 50% of what the stated rating is. Example would be a filter rated at 400 cfm is only affective with a maximum of 200 cfm being pushed or pulled thru it if setting up as a single pass setup.
That's exactly what I had in mind & only plan on using it for the flower tent so a 390 cfm fan will only pull about 195 cfm which would I think work there is a 440 cfm option as well so 220cfm? thanks for your input this is new territory for me
 

Frimpong

🔥Freak Genetics🔥
That's exactly what I had in mind & only plan on using it for the flower tent so a 390 cfm fan will only pull about 195 cfm which would I think work there is a 440 cfm option as well so 220cfm? thanks for your input this is new territory for me
I literally just put my new fan controllers on two of my cheater fans . It was twelve bucks . Go with the 6-in and you can just buy the speed controller if it's too much suction 16056478820212644985263836570822.jpg
 

Capt. C

Saltwater Cowboy
Staff member
Moderator
That's exactly what I had in mind & only plan on using it for the flower tent so a 390 cfm fan will only pull about 195 cfm which would I think work there is a 440 cfm option as well so 220cfm? thanks for your input this is new territory for me
I learned this lesson the hard way. I was trying to reduce heat when i was running a hps light. To try to combat it i turned the exhaust fan all the way up( 400 cfm thru a 400 cfm filter) which is fine as long as it is a recirculating loop. I could not figure out what was going on as they are not clear at all on those cfm ratings. I was stinking up the entire outside of the house. @JL2G got me strait on this subject he is very knowledgeable about grow room stuff.
 

BH

Tha Dank Hoarder
IPM Forum Moderator
if it was me, I did the carbon filter thing years after years. But I wanted a more “sterile “ solution. Since filters won’t do that ( even hepa and a filter clogs quickly )

Forget replacing carbon filters and still having mold in the air and virus and nasty air . I say reduce the issues of voc, molds and viruses and odor issues by 99.9%+ with proper tech and no ozone needed. Just yearly replacement and your done ( water , air and light are such a huge factor for your environment that’s why I invested )

even for your drying room, hints why I dry in the same room as my grow room ( controlled humidity and this Tech to kill it) only fda approved and NASA patented

if you got a small tent , they made a “hobbyist version” (NASA supported and FDA approved)
Airoclean 420 - I bought the commerical version and I’m on the 4th month and it works great , removed all odor even on the smelliest stuff in a huge room or even in a od crop hung on the lines . very confident on the unit .

Airo Home/Hobby Grow - AiroClean420

vs canada made (Air Sniper )



I think per the rate and if bulbs replacement and watts. The air sniper is a better deal. I wish I would of bought a air sniper and if I buy a second unit for my basement . That’s my plan ( but it was be the ultra model since I want more sqft coverage)

its cool that their replacement is every 1.5 years and if you look the airflow vs the airoclean it’s done on per every 10 min vs every hour . stronger baby
 
Last edited:

JL2G

Jesse Loves 2 Grow
Staff member
Moderator
Q-36 Space Modulator
I learned this lesson the hard way. I was trying to reduce heat when i was running a hps light. To try to combat it i turned the exhaust fan all the way up( 400 cfm thru a 400 cfm filter) which is fine as long as it is a recirculating loop. I could not figure out what was going on as they are not clear at all on those cfm ratings. I was stinking up the entire outside of the house. @JL2G got me strait on this subject he is very knowledgeable about grow room stuff.
I do try. Lol.
Sorta in the process of revamping my rooms atm too. Lol. Adding the grow room to my house hvac system, adding a sink back there, and an RO system while I'm at it. Lol.
 

Capt. C

Saltwater Cowboy
Staff member
Moderator
I do try. Lol.
Sorta in the process of revamping my rooms atm too. Lol. Adding the grow room to my house hvac system, adding a sink back there, and an RO system while I'm at it. Lol.
Sounds like it will be a sweet set up my man. Have you checked into the system @Burned Haze speaks of yet . Sounds like a pretty cool setup. Times are a changing. Expensive initial investment but could pay off in the long run. Speaking of that @Burned Haze how much is the replacement bulb for that unit that needs to be replaced yearly ( i think) ?
 

horribleherk

home grown
The move might not happen but still considering a 6in vivosun for my 4x4 tent which is in one end of my work shop which is separate from our home I've been growing here for 5yrs. with no hassles but sometimes I can smell it 2 houses down I wouldn't mind toning it down a bit
 
Top Bottom