BH's Winter 25 - Spring 26 Indoor Journal

[BH]

Dam @BH you are the man! Every plant looks healthy af. Great work man

thanks bro for the kind words, really appreciate you stopping by and looking at journal . Much love and for all the lovers .

—-
MATURE VEGETATIVE BIOLOGICAL + NUTRITIONAL FOLIAR (2 GAL)

Water Volume: 2 gal RO (uvc cleaned )
Target pH: 5.8–6.2
Coverage: Upper canopy thorough; underside light mist optional
Timing: Lights off / early morning
Oil Gap: ≥ 4 days post SuffOil-X
Application Goal: Dull sheen only (no runoff)



FORMULATION & MODES OF ACTION

Structural / Stress Resistance
Impello Dune — 2.0 mL
Mode of Action: Supplies plant-available monosilicic acid, reinforcing epidermal cell walls, increasing resistance to disease penetration, insect feeding, and abiotic stress.
Metabolic & Growth Signaling

Grease Alpha — 12 mL
Mode of Action: Concentrated alfalfa extract (triacontanol-rich) that enhances photosynthetic efficiency, metabolic recovery, and nutrient-use efficiency. Not a surfactant or oil.

Surface Wetting / Distribution
RAW Yucca — 1/4 tsp
Mode of Action: Natural saponin-based wetting agent that improves spray spread and uniform leaf coverage without damaging the cuticle.

Chelation & Transport
RAW Full-Up — 1/4 tsp
Mode of Action: Low-molecular-weight fulvic acids that chelate nutrients and enhance trans-cuticular nutrient transport.
Hormonal Support
RAW Kelp — 1/4 tsp
Mode of Action: Provides natural cytokinins and auxins that promote vegetative vigor, branching, and cell division.

Metabolic Efficiency
RAW Amino Acids — 1/4 tsp
Mode of Action: Supplies pre-formed amino acids, reducing plant energy demand and improving stress tolerance.


Induced Resistance (SAR)
Regalia — 48 mL
Mode of Action: Activates Systemic Acquired Resistance (SAR), priming plant immune responses through phytoalexin production without direct antimicrobial action.


Biological Leaf Colonization (ISR)

OG BioWar Foliar Pack — ~2.5 Tbsp
Mode of Action: Beneficial microbial consortium that colonizes the phyllosphere, suppresses pathogens through competition and antibiosis, and triggers Induced Systemic Resistance (ISR).


Insect Suppression
Venerate XC — 6 Tbsp
Mode of Action: Fermentation-derived enzymatic metabolites that degrade insect cuticles and gut linings via multiple biochemical pathways; non-systemic and resistance-resilient.

MIXING ORDER (IMPORTANT)

1. RO water
2. Impello Dune
3. Grease Alpha
4. RAW Full-Up
5. RAW Aminos
6. RAW Kelp
7. Regalia
8. OG BioWar Foliar Pack
9. Venerate XC
10. RAW Yucca (last)

APPLICATION PARAMETERS

• Spray to dull leaf sheen only
• Leaf surface should dry within 60–90 minutes
• Restore airflow after ~15 minutes
• Avoid oils, sulfur, or copper within ±4 days

ROTATION NOTE

• Rotate Venerate XC ↔ Grandevo WDG weekly
• Keep oil sprays as stand-alone applications only

Final Confirmation
✔ Dosages are correctly scaled
✔ MOAs are accurate
✔ Compatible post-oil
✔ Appropriate for mature veg + high humidity

 

[BH]

* 5 full trays of clones done, way more to go lol

Lil sop/guide

For clone cuttings to sit in and rockwool to have mositure I Fill 5 gal bucket with r/o that’s uvc , 12-24hr to let it room temp. ph correct 5.5, add contiuuum @1.25ml only. put 2 gallons to pitcher for party cup for cuttings to sit in. put 45-50 rockwool 1.5 inch in bucket for 15 minutes . After 15-20 minutes take rockwool and lightly squeeze so the rockwool is wet but not saturated and add them to tray . Take cuttings (using cleaned scissors soaked in physan 20, rotated scissors per mom so gurateed clean ) , mark party cup what cutting is. Let cuttings sit in water for 30 minutes ( I do 5-10 clone strains so by time I’m done with last one I can do 1st cuttings). Final step Take a new/final cut of the cutting and add clone gel to tip ( I add direct to cut where I cut vs dipped method) . than cutting goes tray, once finished add dome and mist sidewalls with water AND Put under clone dome. Have clones in 75-82f

key is being as sterile, clean and proper steps in this like seedlings being so sensitive to sucess bs failures. a big tip is having proper virusicide . Bleach is weak and not suggested from cleaning of misc to scissor cleaning gurateed . bleach is corrosive , bad for ur lungs and skin and also degrades once added to water fast onto air vs physan 20 where if it’s dried on or into water it’s gurateed for 14-21 days. Key is for along time I used iso but iso isn’t a proper way to clean against ag grade issues exp hlvd and many virus related. Plus price alone physan 20 is a gem . Been using over a decade and won’t ever go back, shoot I clean my whole house with it hehe

Physan

Physan20 is a broad range disinfectant, fungicide, virucide, and algaecide which effectively controls a wide variety of pathogens on hard surfaces and plants. Its applications include greenhouses, hard surfaces, lawn and turfgrass, seedlings

www.physan.com

 

[Frimpong]

* 5 full trays of clones done, way more to go lol

Lil sop/guide

For clone cuttings to sit in and rockwool to have mositure I Fill 5 gal bucket with r/o that’s uvc , 12-24hr to let it room temp. ph correct 5.5, add contiuuum @1.25ml only. put 2 gallons to pitcher for party cup for cuttings to sit in. put 45-50 rockwool 1.5 inch in bucket for 15 minutes . After 15-20 minutes take rockwool and lightly squeeze so the rockwool is wet but not saturated and add them to tray . Take cuttings (using cleaned scissors soaked in physan 20, rotated scissors per mom so gurateed clean ) , mark party cup what cutting is. Let cuttings sit in water for 30 minutes ( I do 5-10 clone strains so by time I’m done with last one I can do 1st cuttings). Final step Take a new/final cut of the cutting and add clone gel to tip ( I add direct to cut where I cut vs dipped method) . than cutting goes tray, once finished add dome and mist sidewalls with water AND Put under clone dome. Have clones in 75-82f

key is being as sterile, clean and proper steps in this like seedlings being so sensitive to sucess bs failures. a big tip is having proper virusicide . Bleach is weak and not suggested from cleaning of misc to scissor cleaning gurateed . bleach is corrosive , bad for ur lungs and skin and also degrades once added to water fast onto air vs physan 20 where if it’s dried on or into water it’s gurateed for 14-21 days. Key is for along time I used iso but iso isn’t a proper way to clean against ag grade issues exp hlvd and many virus related. Plus price alone physan 20 is a gem . Been using over a decade and won’t ever go back, shoot I clean my whole house with it hehe

Physan

Physan20 is a broad range disinfectant, fungicide, virucide, and algaecide which effectively controls a wide variety of pathogens on hard surfaces and plants. Its applications include greenhouses, hard surfaces, lawn and turfgrass, seedlings

www.physan.com

Very cool info , def gonna grab some . Thx @BH

 

[BH]

* Final IPM “Knockout” Foliar 2 gallons water ( spray both rooms)
SuffOIL-X @7 TABLESPOON

+

Ordered my bugs, predator mites and nematodes for this cycle. Got timing down and makes even if my medium has crazy organic material and moist majority it should be FG free and care-free against rest of bugs I don’t have to use knockouts at this stage-end . tried this both indoors last round and outdoors and def worked out great . Key is scouting and having this pest/mold pressure gurateed and apply everything before a huge outbreak happened. Prevention and control is key
Package Should be here tomorrow (1 day air) , after today all biological and npk based foliars.

8-10 years from pest Id confirmation to amazing ipm suggestions and most of all best IPM products Evergreen is the best and always in their game. Best prices for these such products and def vouch for them !

Supplier of Beneficial Insects, Natural Fungicides & Insecticides, Sticky Tape, and Pheromone Lures - Evergreen Growers Supply, LLC

Evergreen Growers Supply, LLC - Distributor of beneficial insects for biological control of aphids, flies, fungus gnats, leaf miners, mealybugs, mites, thrips, whiteflies, scales. We also offer complimentary products such as Actinovate ag, Actinovate sp, Actino-Iron, Met52, NoFy and much more.

www.evergreengrowers.com

Steinernema feltiae Beneficial Nematodes - 250 million
Rove beetle (Dalotia coriaria) or Atheta coriaria - 1,000
Hypoaspis (Stratiolaelaps scimitus Womersley) 25,000
Amblyseius andersoni Slow Release - 250 each packet ( 50x)
Amblyseius swirskii Slow Release - 250 each packet (50x)

Major updates coming soon !

 

[BH]

Updates: Tomorrow is LAST DAY OF Veg stage 17on/7off off lights than 12/12 light cycle ! Plan is taking last cuttings ( only need a few more pheno’s) this week and be done ( smallest moms) . reorganized the XL moms in garden to tallest and raised many led’s ( at low dim %). co2 is set at 950ppm , hvac set at 80F (only 1 of 2 is on , both need to be cleaned ) , 2ND QUEST DEH TURNED ON RH SET 70%. Adjusting main wall fans upward so I don’t have the plants get fan blasted and also want led’s to be air cooled. Tomorrow is “flower stage” IPM biological ( read above post on that )

——-
55-GAL EARLY BLOOM WEEKLY DRENCH

• 55 gal RO water, temp 65–72°F
• Aeration on
• Tools ready: small pitcher, measuring spoons/cups, stir stick

Brewed Ingredients (12–18 hrs)
Purpose: Nutrients & metabolic drivers — safe to aerate

Order​	Ingredient​	Amount​	MOA / Tips​
1	RAW NPK Silica	¼ cup	Cell walls, stress tolerance — first to disperse
2	DIY Roots Organic Elemental (Cal/Mag)	½ cup	Structural growth, low N — early for full dispersion
3	Terp Tea Grow	¼–½ cup	Nitrogen + amino acids for stretch
4	Terp Tea Bloom	¼ cup	Early P/K signaling
5	Terp Tea Microbe Boost	½ cup	Microbe food — no live microbes, safe to brew
6	RAW NPK Humic Acid	¼ cup	Chelation, nutrient uptake, microbial stimulation
7	RAW Full-Up	¼ cup	Carbon transport, flower-site energy
8	RAW Aminos	¼ cup	Protein synthesis, enzyme production
9	RAW NPK Kelp	2–4 Tbsp	Cytokinin, stress tolerance, early bloom support

Tip: Stir gently after each addition; aerate during full 12–18 hr brew.

Pre-Drench Additions (Add immediately before drench)
Purpose: Microbes, enzymes, and wetting agent — do NOT brew

Order​	Ingredient​	Amount​	MOA / Tips​
1	PowerSi PowerPK	25–30 mL	Unlocks soil P/K; low rate protects nematodes
2	OG Biowar Root Pack	½ cup	Root Production and protection, mycoparasitic fungi/microbes
3	OG Biowar Nute Pack	½ cup	Microbes Converts organics to plant-available nutrients
4	Continuum	25–60 mL	Colonizes rhizosphere, suppresses pathogens
5	RAW Enzyme	1–2 Tbsp	Recycles dead root matter, boosts exudate activity
6	RAW NPK Yucca	1 tsp–1 Tbsp	Wetting agent, improves root/soil penetration

Tip: Stir gently after additions, apply immediately. Avoid oils or strong agitation.

Application Tips

• Drench evenly around root zone
• Keep medium evenly moist for 3–5 days
• Monitor plant stretch, leaf turgor, and color for next drench adjustments
• Silica + Cal/Mag first → ensures full dispersion
• Pre-drench additions last → preserve microbe viability

 

[BH]

RELEASE THE KRAKEN!

View attachment IMG_3121.mov

 

[BH]

What’s up everyone, Day 5 of BLOOM!
starting now-end is where it starts to get interesting. I’ll be posting some pictures/tour soon! Crazy how much they have grown and I even topped so many literally days before-after flipped. Can’t even tell lol

FLOWER ROOM : organized bed’s/plants from shortest-tallest , Raised led’s qb’s 16-24inches (uva on when buds formed) , cob vero 29’s 18-30 inches , medicled 880 watt spectrum x @12-24inches , switched spectrum to F1 ( once buds forming ir/uva on). will turn on last 330 watt timber’s soon ( once led’s are raised more)+ install rapidled uva to timber led section (4x8 bed). HVAC & DEH set to same as peak veg -stage ,81f set in hvac and rh set to turn on at 70%rh, keeping vpd perfect (1-1.2) and less stresses potentially . Running this many testers and dif needs you gotta have a more lean/buffered environment zone . Moved the seedlings I germinated a few weeks to flower room and my use will be ethier plant them into any spot a male or have them live in a 2-5 gal pot and have the plant live aside with everything else.


Vegroom: first 5 trays of clones are roots everywhere , need to up-pot than kill the xl/old mom ( after fresh mom shows roots on bottom). took me 14 trays to do the testers and crazy part 75%+ is fem’s. I’ll be killing many before i even Chop but it’s a rule for me if I’m hunting to have all pheno’s till that stage. Sucks but def worth it . Key is I leave them clone medium or 1st stage well feed/water but don’t waste sqft on big potted plants of iffy testers.

 

[BH]

Day 14 of bloom !



Flower ROOM: hvac set on 79f but fan setting mode “turbo” so more fan power , led’s raised , medicled 880 watt changed to flower stage 2 mode aka deep red/ ir/uva on, dimmer only on all 50-60%. Co2 set to 1,100 but soon 1,200ppm. Yesterday I finnaly replaced my driver in the broken 650r that failed last season. It works perfectly now and plan is to replace the 2x 300 watt qb’s , maybe inly remove one 330 and make it so u cna have more coverage with both led’s and dim em?


Males found so far, killed and logged
Pbm2
Pbm3
Pbm4
Wzc3
RT1
RT2
YC1
——-


Vegroom : all trays but last one are showing amazing roots, up-potting them to 1st stage pot asap!, moved all moms into 4x8 and plan is once cutting is transplanted and proven 1-5 days of no wilt after transplant I will move/kill or donate to buddy the xl mom. don’t need 5ft 1st stage pot moms besides the pheno’s I don’t have a clone of .


WEEK 2 BLOOM TEA – 55 GAL (UPDATED)


BREW PHASE (12–72 hrs)

RAW NPK Silica – ¼ cup
MOA:

• Cell wall strength
• Stress resistance
• Improves Ca utilization later

DIY Roots Organic Elemental (Cal/Mag, low N) – ½ cup - 1 cup
MOA:

• Calcium for bud cell division
• Magnesium for chlorophyll stability

This becomes more important since Grow is removed.

Terp Tea Bloom – 1 cup
MOA:

• Strong P/K signal
• Sets flower sites aggressively
• Shifts plant fully into generative mode

Why this works at day 14:
Stretch is mostly done; flower sites are committing

Watch internodes closely — if stretch isn’t finished, this can shorten them fast (often desirable).



Terp Tea Microbe Boost – ½ cup - 1 cup
MOA:

• Feeds microbes
• Enhances mineralization of Bloom inputs

RAW NPK Humic Acid – ¼ cup
MOA:

• Chelates P, Ca, Mg
• Improves uptake under heavier Bloom feed

RAW Full-Up – ¼ cup
MOA:

• Carbon transport
• Drives energy toward flower sites

RAW Aminos – ¼ cup
MOA:

• Stress buffering
• Supports enzyme activity under generative push

RAW NPK Kelp – 1–2 Tbsp
MOA:

• Hormonal balance
• Prevents shock from Bloom-only feed

Reduced dose is key — keeps hormones quiet.

Brew 12–18 hrs with aeration


PRE-DRENCH ADDITIONS (JUST BEFORE APPLYING aka drench)

PowerSi PowerPK – 25–60mL

MOA:

• Unlocks soil-bound P/K
• Improves Bloom efficiency

OG Biowar Root Pack – ½ cup
MOA:

• Root defense / promotion of roots
• Pathogen suppression

OG Biowar Nute Pack – ½ cup
MOA:

• Converts organic nutrients into plant-available form

Continuum – 30–50 mL
MOA:

• Rhizosphere colonization
• NPK FIXERS
• Competitive exclusion

RAW Enzyme – 1–2 Tbsp
MOA:

• Root recycling
• Nutrient liberation

RAW NPK Yucca – 1–2 tsp
MOA:

• Wetting agent
• Improves penetration through top dress

&
Regalia @120-200ml
MOA
SAR/ISR Booster / biofungicide



WHY THIS STILL WORKS (AND WHEN IT WOULDN’T)
Works well if:

• Stretch is ≥80% complete
• Leaves are healthy green
• Beds have been top dressed recently
• Biology is active

Watch for:

• Pale new growth → next drench add a touch of N (Grow or frass tea)
• Over-tight nodes → reduce Bloom to ¾ cup next run
• Tip burn → unlikely but possible if medium is already hot

——

Don’t worry Updated pictures/tour shots comming real soon

 

[BH]

Bloom Day 18!
Flower Room: trellis was added to 4x8 bed last week,5 more males ( all small potted plants on side) killed and removed , CO2 Raised to 1250ppm , Light DIM set to 60-75% ( excluding one low ppfd zone) , asap bambooing and wiring plants for final support. i had 2 confirmed pheno's die from over water just because the plant was in same bed as a monster and it made the shaded plant weak and since in same bed i had no choice. Temp is still set (HVAC) to 78f since canopy temps is 80-84f ontop. another step when i bamboo support or not is to deleaf any obvious leaf shading stuff. i try to lollipop only and top overly stetchy pheno's before flip and do more heavy de-leafing once i get closer to day 20-25ish and remove what needs to vs all. DEH RH is still set for 70% (perfect vpd).

Moved my 2nd air mover (quest) to flower room, replaced both filters.



Stretch is mostly over lol

 

[BH]

 

[BH]

GR2 Indoor Bloom Foliar (1.25 Gallons)

• Low residue
• No flower matting
• No terp interference
• No microbial overloading

Final Indoor-Bloom Adjusted Formula

Product​	Dose (1.25 gal)​	Mode of Action​
DUNE	1 mL	Silica strengthens epidermal cells, increases leaf rigidity, improves stress tolerance under high PPFD.
Grandevo	1–1.5 tsp (not Tbsp)	Fermentation metabolites disrupt insect feeding and act as contact/stomach toxin for soft-bodied pests. Lower rate = minimal residue indoors.
Regalia	20 mL (reduced from 30)	Induces systemic acquired resistance (SAR). Boosts phytoalexins without over-stimulating bloom plants.
OG Biowar Foliar	1 Tbsp	Bacillus colonization for preventative leaf surface competition.
RAW Amino Acids	1/8 tsp	Chelation + stress buffering during flower transition.
Terp Gerp	5 mL	Secondary metabolite enhancer; supports terp expression during early bloom.
RAW Yucca	1/16 tsp	Wetting agent for uniform coverage without droplet beading.

Mixing Order (Important)

1. Fill tank 75% with water
2. Add DUNE (silica first)
3. Add Regalia
4. Add Terp Gerp
5. Add RAW Amino
6. Ph adjust foliar brew to 6.0-6.5
7. Add Grandevo WDG
8. Add OG Biowar
9. Add Yucca last
10. Top off water and agitate

Spray immediately — don’t let microbes sit in solution.
When To Spray In Bloom
Since you’re indoors and clean:

• Use weeks 1–3 of flower
  • Grandevo
  • OG Biowar
    (to avoid residue and bud moisture retention)

Late bloom = silica + light amino + Terp gerp only if anything.
Important Indoor Tip
Spray:

• Lights OFF
• Good air movement
• Leaf surface dry within 45–60 mins
• Avoid heavy saturation on pistils