Chain Saw's

[Capt's Farm]

Well I got all 3 running.....

This is why shit don't last....

1 chain is 20 yrs old.....

The other is form last yrs saw buy......

Both are 16 inch.....

 

[1D1]

Well I got all 3 running.....

This is why shit don't last....

1 chain is 20 yrs old.....

The other is form last yrs saw buy......

Both are 16 inch..... View attachment 8367 View attachment 8368 View attachment 8369

Bro, throw that rusty blade in the scrap pile with them damn saws!
Buck up and get a new saw......maybe a ....STIHL?

 

[Capt's Farm]

TY Everyone

think were on the right track............

You all rock.................

so I guess i worked on chain saws all morning. day lol

STIHL saws are specifically built for there chains, bar oil and mix. Don’t use any other then specially STIHL Or you will shorten your life expectancy of your STIHL chainsaw or any other STIHL machinery, IE, blower, trimmer, etc.
Fuck, I sound like a walking STIHL poster child?‍♂️

do you have a hook up...LOL I'm going to buy one ...................... I need to get something thats going to last..... been looking at that 271 this morning..... and that's why I'm asking more??? about this...... I want to do it right..................

 

[Gweedo's Growroom]

I'll probably get roasted for this lol but I just bought 2 of the poulan pro 50cc saws, one is 4 yrs old the other is 2, they work fantastic lol 100$ on sale 20 in bar, throw away the safety chain it comes with get full chisel chains for whatever you have, huge difference, I then slotted the adjustment screw on the carbs adjusted about an eighth turn in the richer direction and drilled a 3/4 in hole in the muffler, they absolutely rip when you get the carb dialed in, way more power and they run pretty cool as well, 2 saws and 2 chains ran 240 ish and I can cut all day just alternating them, unknown fact as well the 50cc 20in bar poulans are made by husqavarna, I checked internals ??????

 

[1D1]

TY Everyone

think were on the right track............

You all rock.................

so I guess i worked on chain saws all morning. day lol

do you have a hook up...LOL I'm going to buy one ...................... I need to get something thats going to last..... been looking at that 271 this morning..... and that's why I'm asking more??? about this...... I want to do it right..................

Coastal farm supply is where I pick up my STIHL machinery.
Like to keep my money local.
Your on the rite track with a farm boss.
Kicks ass!

 

[Gweedo's Growroom]

Secrets out now I'm a huge small engine nerd ???

 

[1D1]

I'll probably get roasted for this lol but I just bought 2 of the poulan pro 50cc saws, one is 4 yrs old the other is 2, they work fantastic lol 100$ on sale 20 in bar, throw away the safety chain it comes with get full chisel chains for whatever you have, huge difference, I then slotted the adjustment screw on the carbs adjusted about an eighth turn in the richer direction and drilled a 3/4 in hole in the muffler, they absolutely rip when you get the carb dialed in, way more power and they run pretty cool as well, 2 saws and 2 chains ran 240 ish and I can cut all day just alternating them, unknown fact as well the 50cc 20in bar poulans are made by husqavarna, I checked internals ??????

Husqy makes a damn good saw to.
But I seam to be working for STIHL in this thread

 

[Capt's Farm]

Bro, throw that rusty blade in the scrap pile with them damn saws!
Buck up and get a new saw......maybe a ....STIHL?

that was new just taken out of the pack....... before I moved..... it got wet last yr...... this yr... just got to the tota it was in that the dogs ate the side so it's got water in it..... part of all the stuff, I'll lose by the time I'm unpacked now........

I'll run it on my old Poulin it doesn't have a oiler that works so it don't matter......................................

 

[Gweedo's Growroom]

I'm a tinkerer lol I've had 2 Stihl pieces and shit went South quick lol did some digging in the big poulans all the other models suck ass, and with the residential grade stuff they run em so lean for emissions if you go hard on em the cylinders eat themselves, doing that little carb exhaust mod let's em run in a much friendlier range of temps, plus I'm cheap as all hell so catching the 50cc model on sale for 99 was a no brainier once I realized it was just a rebranded husky, cheaper bar and chain, I just bought replacements from Oregon chains as well, you know how it goes if you cut a lot they get wrecked pretty easy lol. I've got a lot of hours on both saws and no problems ever, and I mean a lot ???

 

[Capt's Farm]

feels like it should be 3pm and its 10:30 am and raining...lol

 

[Capt's Farm]

I think husky makes just about all the other saw out there now.......

 

[Capt's Farm]

I'll probably get roasted for this lol but I just bought 2 of the poulan pro 50cc saws, one is 4 yrs old the other is 2, they work fantastic lol 100$ on sale 20 in bar, throw away the safety chain it comes with get full chisel chains for whatever you have, huge difference, I then slotted the adjustment screw on the carbs adjusted about an eighth turn in the richer direction and drilled a 3/4 in hole in the muffler, they absolutely rip when you get the carb dialed in, way more power and they run pretty cool as well, 2 saws and 2 chains ran 240 ish and I can cut all day just alternating them, unknown fact as well the 50cc 20in bar poulans are made by husqavarna, I checked internals ??????

that's why I got the chaftsman's last yr..... it was on sale 100$$$ and it's made by husky....

 

[1D1]

Been running my STIHL 250 for 22 years and STIHL going.

 

[Capt's Farm]

Like I said I need something bigger also....

I got trees now.......

 

[Capt's Farm]

I went to keep a lot of this stuff and use it..... there's a lot of nice wood down right now....

I could spend a month just cutting wood and need to.......

 

[Caddis]

I'll probably get roasted for this lol but I just bought 2 of the poulan pro 50cc saws, one is 4 yrs old the other is 2, they work fantastic lol 100$ on sale 20 in bar, throw away the safety chain it comes with get full chisel chains for whatever you have, huge difference, I then slotted the adjustment screw on the carbs adjusted about an eighth turn in the richer direction and drilled a 3/4 in hole in the muffler, they absolutely rip when you get the carb dialed in, way more power and they run pretty cool as well, 2 saws and 2 chains ran 240 ish and I can cut all day just alternating them, unknown fact as well the 50cc 20in bar poulans are made by husqavarna, I checked internals ??????

ROAST ROAST ROAST!
I’m sure there’s people that don’t like Stihl either.

Like I said I need something bigger also....

I got trees now....... View attachment 8375 View attachment 8377 View attachment 8380 View attachment 8381

I’m guessing that 3/16 chain?
I’m not kicking your saw, at all, but just how close your hands are on the saw suggests it’s more of a trim saw?
Not getting a lot of leverage, make sense?
It’s nice to have a saw with good dogs to lean into it. Trying to explain this may not be working?
20” should be part of the possible future upgrade?
Old days, we’d be on our way!
I know you got
Wish I could help.

 

[Capt's Farm]

STIHL MS 250 Chainsaw in Cookeville, TN 38501

Buy a STIHL MS 250 Chainsaw online today from Gentry's Power Equipment! Find the right homeowner chainsaw for you in Cookeville.

gentryspowerequipmentcookeville.stihldealer.net

MS 271 Farm Chainsaw in Cookeville, TN 38501

Buy a MS 271 Farm Chainsaw online today from Gentry's Power Equipment! Find the right farm & ranch saws for you in Cookeville.

gentryspowerequipmentcookeville.stihldealer.net

I'll go talk to them.. there close and the small guys need help.............................................