DIY Can Pipe

spyralout

🌱🌿🌲πŸ”₯πŸ’¨
Staff member
Administrator
Moderator
OK I had to. We've all had our moments where we're in a pinch. This is more nostalgic than anything.

1597646270784.png

- Obtain any aluminum can, rinse if possible
- Pull off pull tab and push the aluminum lid part punched in as far as you can back into the can
- Crunch/flatten down the middle like the pic above
- Within the pocket, use a pen or other pointy/sharp device to poke 17 holes (less means less draw, smaller holes need more)
- Poke pen sized carb hole in side (optional, still works without)
- Load herb on top of holes
- Light up and puff through the opening



:rolleyes:?
 

jaguarlax

Tactical Gardener
Staff member
Administrator
Moderator
OK I had to. We've all had our moments where we're in a pinch. This is more nostalgic than anything.

View attachment 20694

- Obtain any aluminum can, rinse if possible
- Pull off pull tab and push the aluminum lid part punched in as far as you can back into the can
- Crunch/flatten down the middle like the pic above
- Within the pocket, use a pen or other pointy/sharp device to poke 17 holes (less means less draw, smaller holes need more)
- Poke pen sized carb hole in side (optional, still works without)
- Load herb on top of holes
- Light up and puff through the opening



:rolleyes:?
PLEASE LORD UNCLE SPY TELL ME YOU DIDNT SMOKE OUT OF THIS LAST NIGHT.
 

stanknugzz77

CHOOSE YOUR TITLE
I remember these..VERY WELL!!!!!!!!

And yes, uncle @jaguarlax I smoked the crap out of them! ?

View attachment 20735
I was going to say, @spyralout, what made you choose making a post about the can instead of the steam roller toilet paper/paper towel rolls or using an apple or breaking the whole fucking kitchen sink for parts and wire screen mesh and having your father bust your ass? Hahaha. Ah nostalgia is a hell of a drug. Positive vibes...

~nugzz
 

Jewels

Tilts at Tables
If you got weed and a source of high temps, there is always a way.
When I was a kid, I would loot coil lighters from the cars in the scrap yard when I went out 'picking' for my Dad.
Was nice to have a few back-ups that would cool down in rotation during our "Saskatchewan dipping parties"
All the honey oil seemed to come from the East. We would sit and dribble that stuff on our own coil and just wait in rotation for the socket to be available. That 70 chevy had a steel dashboard and with a half dozen lighters in play, the socket could run continuously until the instrument panel became hot to the touch.

Good times. I now recall this one particular lighter that was oversprung and underfrictioned. That sucker would launch like a cannon ball from the dash, when she was good to go.
 

spyralout

🌱🌿🌲πŸ”₯πŸ’¨
Staff member
Administrator
Moderator
I was going to say, @spyralout, what made you choose making a post about the can instead of the steam roller toilet paper/paper towel rolls or using an apple or breaking the whole fucking kitchen sink for parts and wire screen mesh and having your father bust your ass? Hahaha. Ah nostalgia is a hell of a drug. Positive vibes...

~nugzz
It's cuz it's the can man. LOL Done all the other shit too, but the can...air tight, find one anywhere, etc. I have to admit. It wasn't too long ago I used the can, it was 2007, I was in another state, had no piece, and just scored some Green Crack. LMAO smokin the crack from the can ?
 

spyralout

🌱🌿🌲πŸ”₯πŸ’¨
Staff member
Administrator
Moderator
OK so who's gonna put up a thread in this section for these teks:

- 2 liter bottle gravity bong
- hot knife hash
- hotel gideon bible paper (yes I'm going to hell)
- shoe paper
- "spleef" 2 liter bottle stuffed with bounce fabric sheets to blow thru the smoke

and yes, I had a buddy that took his dad's Cheech and Chong Big Bambu record paper and used it.

??
 
Top Bottom