Genuity's Garden

[spondylogrow]

You wanting to run them all, with the LEDs outside of the 315? Or you replacing the 315?
I was reminded of this hybrid light setup @Capt. C runs. Hopefully he won't mind me snagging his pics to share.
To frame up them boards, 1inch aluminum L-channel from the depot works good.

 

[Genuity]

You wanting to run them all, with the LEDs outside of the 315? Or you replacing the 315?
I was reminded of this hybrid light setup @Capt. C runs. Hopefully he won't mind me snagging his pics to share.
To frame up them boards, 1inch aluminum L-channel from the depot works good.

Yup,that's what I'm looking for...
Running it all together is my end goal.

 

[Capt. C]

You wanting to run them all, with the LEDs outside of the 315? Or you replacing the 315?
I was reminded of this hybrid light setup @Capt. C runs. Hopefully he won't mind me snagging his pics to share.
To frame up them boards, 1inch aluminum L-channel from the depot works good.

I should have gone to home depot for good prices. I am working on a new hot rod (light) out in the garage now. Went to the local hardware store and picked a extra piece or two from what i needed of the 1" aluminum angle. I had to pull out a credit card 72 us dollars for the angle pieces. Wowsa!

 

[Texagonian]

I should have gone to home depot for good prices. I am working on a new hot rod (light) out in the garage now. Went to the local hardware store and picked a extra piece or two from what i needed of the 1" aluminum angle. I had to pull out a credit card 72 us dollars for the angle pieces. Wowsa!

It’s the corona virus causing things to inflate while at the same time causing an unstable market to slide. Maybe. I’m kinda being a smart ass here but not at the same time. Whatcha building Capt.?

 

[Capt. C]

It’s the corona virus causing things to inflate while at the same time causing an unstable market to slide. Maybe. I’m kinda being a smart ass here but not at the same time. Whatcha building Capt.?

I am combining three different lights together in one fixture. In the middle will be a 370 actual watt blurple light that has the capability to switch down to 220 actual watts for veg mode or up to 370 actual watts( 144 5 watt led diodes). On each side of the center light will a HLG e-lite 360 with potometers installed to be able to adjust the wattage. Just shy of 1100 watts total. I will put up a thread when i finish with it. The new 4x4 that it is going in will be a multipurpose unit. I am setting up right now to use it as a drying room with the new AC infinity. I would love to be able to hang the plants for more than 5-7 days that i currently hanging. Hoping to be able to control it to try and get closer to a 10-14 day hang time. This AC infinity programing is way over my head but i am working on it.

 

[Texagonian]

I am combining three different lights together in one fixture. In the middle will be a 370 actual watt blurple light that has the capability to switch down to 220 actual watts for veg mode or up to 370 actual watts( 144 5 watt led diodes). On each side of the center light will a HLG e-lite 360 with potometers installed to be able to adjust the wattage. Just shy of 1100 watts total. I will put up a thread when i finish with it. The new 4x4 that it is going in will be a multipurpose unit. I am setting up right now to use it as a drying room with the new AC infinity. I would love to be able to hang the plants for more than 5-7 days that i currently hanging. Hoping to be able to control it to try and get closer to a 10-14 day hang time. This AC infinity programing is way over my head but i am working on it.

Right on! Sounds neat, I’ll check it when it’s done. I’m running two 315 cmh/lec in a 4x4 one air cooled one open. Gonna be too hot for all that this summer. May have to go back to blurple or build a strip or qb rig. Been wanting to anyways but just watching my spending.

 

[AlienAthena]

Right on! Sounds neat, I’ll check it when it’s done. I’m running two 315 cmh/lec in a 4x4 one air cooled one open. Gonna be too hot for all that this summer. May have to go back to blurple or build a strip or qb rig. Been wanting to anyways but just watching my spending.

QB288 V1 Boards are $29 right now. 4 of those and 2 heatsinks, $49 for double, or 6-8 without heatsinks would be just as good and then you just need angled aluminum and the driver(s).

I just ordered 2 boards and a double heatsink so i can expand.

edit: This is on the Horticulture Lighting Group website in case there’s any confusion.

 

[Genuity]

QB288 V1 Boards are $29 right now. 4 of those and 2 heatsinks, $49 for double, or 6-8 without heatsinks would be just as good and then you just need angled aluminum and the driver(s).

I just ordered 2 boards and a double heatsink so i can expand.

edit: This is on the Horticulture Lighting Group website in case there’s any confusion.

Damn,all of this can be found at the same site?

My veg is going to love this much needed upgrade.

 

[AlienAthena]

Damn,all of this can be found at the same site?

My veg is going to love this much needed upgrade.

Yup but they only have the V1 boards in 3000k but the V2 in 4000k are $55.

 

[Texagonian]

QB288 V1 Boards are $29 right now. 4 of those and 2 heatsinks, $49 for double, or 6-8 without heatsinks would be just as good and then you just need angled aluminum and the driver(s).

I just ordered 2 boards and a double heatsink so i can expand.

edit: This is on the Horticulture Lighting Group website in case there’s any confusion.

Thank you for that. I’ve looked elsewhere and all I could find was the qb132 in a few k choices and all that’s left is 4000k Thanks for looking out?✌?

 

[AlienAthena]

Thank you for that. I’ve looked elsewhere and all I could find was the qb132 in a few k choices and all that’s left is 4000k Thanks for looking out?✌?

No problem. We‘re all on the same quest to grow that stanky dank so I’m always ready to help if possible

 

[Genuity]

Double up mints x Dulce cherry punch, waiting to see if any more males pop up

Under a old 315lec bulb

 

[Buck5050]

Double up mints x Dulce cherry punch, waiting to see if any more males pop up
View attachment 3560
Under a old 315lec bulb

Yo Gen. We gonna be getting some stomper on stomper action up in here?

 

[Genuity]

Yo Gen. We gonna be getting some stomper on stomper action up in here?

You know it,soon as I hit up the fine folks that offered to help out????

 

[Buck5050]

You mentioned digging out some HoneyStomper to pair up. Is that what you still thinking?

 

[Genuity]

You mentioned digging out some HoneyStomper to pair up. Is that what you still thinking?

Yup,I'm so familiar with the stomper & know that honeystomper like the back of my hand..
& it's well worked,I'm thinking it's going to be badass.

 

[Buck5050]

Yup,I'm so familiar with the stomper & know that honeystomper like the back of my hand..
& it's well worked,I'm thinking it's going to be badass.

No doubt.