What did you do today?

JL2G

Jesse Loves 2 Grow
Staff member
Moderator
Q-36 Space Modulator
Took all of an hour. And most of that time was on the sofa. Small dose batch is really easy.

Took a small metal dish, with another for a lid.
Put 3 to 4 grams of joint leftovers in it with two tablespoons oil.
Put the second dish on top as a lid using a small binder clip to hold it, and baked for an hour at 240. 15836282523951640664959.jpg
Poured through a single layer of 220 mesh and squeezed out as much as I could. Washed it all with hot water. And done.
Like maybe 6 to 8 minutes of actually doing something. Lol.
Oh, and I ate some. Lol. Gonna eat another bit here shortly. Lol.
Then watch another movie with the dogs. Lol
Maybe ramble a bit more. Rofl.
Make sure the sofa doesn't float away and all.
 

Highsince76

In Bloom
Took all of an hour. And most of that time was on the sofa. Small dose batch is really easy.

Took a small metal dish, with another for a lid.
Put 3 to 4 grams of joint leftovers in it with two tablespoons oil.
Put the second dish on top as a lid using a small binder clip to hold it, and baked for an hour at 240. View attachment 3318
Poured through a single layer of 220 mesh and squeezed out as much as I could. Washed it all with hot water. And done.
Like maybe 6 to 8 minutes of actually doing something. Lol.
Oh, and I ate some. Lol. Gonna eat another bit here shortly. Lol.
Then watch another movie with the dogs. Lol
Maybe ramble a bit more. Rofl.
Make sure the sofa doesn't float away and all.
Ok. I'm not even high, and I'm a little confused! But maybe that's the problem. lol

Not real up on the edible side of things... yet, like I should be.

I get it all up until "squeezed out as much as I could. Washed it all with hot water"
Are you utilizing the flower or oil when finished? I would think thc is in the oil after oven. But your talking "eating", like your chewing on something. Or you running some crackers or bread through that oil?

What am I missing out on? Lol
I like oil and bread and snacking on the sofa!
 

spyralout

🌱🌿🌲🔥💨
Staff member
Administrator
Moderator
Car repairs. Changed oil, air filter, spark plugs, o2 sensor, reset codes. Hopefully it'll pass smog after I drive it around to hit the drive cycles. Now time to relax in trim jail.

Gonna join Jesse with the edibles tonight. Trying the Instant Pot decarb I keep hearing about.

@Highsince76 use the oil. He's squeezing every last bit of infused oil out of the plant material.
 

Badmofo529

In Bloom
Got me a couple pairs of new jeans today, fucking hate spending money on clothes, but I've lost about 80lbs since the last time I bought any, and I finally got fed up with how big and annoying they all fit. I don't think I've fit in a size 38 since like 8th grade lmao.
 

Feva

In Bloom
Congrats on the weight loss @Badmofo529! I recently lost a shit ton of weight also, and had to reup on the clothes. lol About 2 years ago I was looking at pics and thought damn i need to lose some weight. I was at 288. Im now at 195. and feel a whole lot better.
 

spyralout

🌱🌿🌲🔥💨
Staff member
Administrator
Moderator
Decided to take pictures after decarbing 2 half full pint jars for 40 Min on High in the Instant Pot...

20200307_InstantPotDecarb.jpg
Decarbbed trim

20200307_InstantPotDecarb2.jpg
1 cup butter each pint jar
New lids
20200307_InstantPotDecarb3.jpg
Tightened up lids, replaced jars in pot, topped off water to half way past jars or a bit above the trim/butter line

OMW to store to get snacks ? ?
 

jpcyan2

In Bloom
Had a local company bring 3 dump truck loads of rock for my driveway. I think it was about 30-35 tons in total.
Had to get up in the bucket and do some tree trimming so they could gate dump as smoothly as possible. Got enough fire wood for 2-3 days heat and hot water for the house. Which was a good thing as I didnt have time to actually go cut/haul anything else from the woods.
of course I broke my rake in the first ten minutes and had to rig it back up with hose clamps and duct tape :D
Took most of the day to rake and level what I could by hand. Had a few areas they weren't able to get a smooth coverage.
Damn nice not to be driving in mud and muck now though. So much rain this winter I still have standing water in the yard.
Dont know what hurts worse though, my back and arms, or my wallet. Ran just under a grand, hopefully it lasts a few years.
 

JL2G

Jesse Loves 2 Grow
Staff member
Moderator
Q-36 Space Modulator
Ok. I'm not even high, and I'm a little confused! But maybe that's the problem. lol

Not real up on the edible side of things... yet, like I should be.

I get it all up until "squeezed out as much as I could. Washed it all with hot water"
Are you utilizing the flower or oil when finished? I would think thc is in the oil after oven. But your talking "eating", like your chewing on something. Or you running some crackers or bread through that oil?

What am I missing out on? Lol
I like oil and bread and snacking on the sofa!
Lol, I was getting pretty high towards the end of typing that. ?
A bit of clarification now that I'm back from last night's la la land. Lmfao.

The squeezing part is just to get every last bit of the oil out of the plant material.
Think of squeezing a tea bag in your cup type deal before you toss it to the trash. Otherwise alot of the oil put in will not come out.

The rinse with hot water part is in reference to the mesh screen, just hot water to clean and take away all the leftover oil and or weed particles. I don't use soap to clean it so as to not have any residue left in the mesh. Just really hot water at pressure. Lol. And then a hang dry.

The eating is just taking a measuring spoonful like I was eating a broth soup. Lol. But yes putting it in or on something works if you don't like the taste so much. Lol.
I just eat the oil straight, like soup. ???
When left to cool to 70 or below it tends to solidify some, like soft butter. Above that temp it tends to stay oil like.
If kept in my pantry it gets to be like peanut butter consistancy. Easy to eat by spoon. Lol
 

JL2G

Jesse Loves 2 Grow
Staff member
Moderator
Q-36 Space Modulator
That squeezing every last bit out part, when using the cheesecloth I twist it so it tightens down on the ball of weed. Does a good job of getting most of it out that way. Just be careful of it getting a blow out. Lol.
I've used my hands then to squeeze out even more, but it's pretty hot. Lol.
A clean squeeze clamp works well to get it really good though while it's hot.
 

spyralout

🌱🌿🌲🔥💨
Staff member
Administrator
Moderator
That squeezing every last bit out part, when using the cheesecloth I twist it so it tightens down on the ball of weed. Does a good job of getting most of it out that way. Just be careful of it getting a blow out. Lol.
I've used my hands then to squeeze out even more, but it's pretty hot. Lol.
A clean squeeze clamp works well to get it really good though while it's hot.
Yes man it was lol the "tssst-OW" repeatedly while twisting. Got about 1.75 out of 2 cups. Clamp is a good idea. Need a Keurig for this type of shit lmao ??
 

Texagonian

CHOOSE YOUR TITLE
Yes man it was lol the "tssst-OW" repeatedly while twisting. Got about 1.75 out of 2 cups. Clamp is a good idea. Need a Keurig for this type of shit lmao ??
Just thought I’d chime in on the squeeze part while hot. Take a couple large spoons and place the cheesecloth or screen between them and squeeze with the spoon handles. Saves your fingers from the burn. How’d the car repairs go @spyralout . Bro, you can always holler at ya boy for car troubles. It’s what I do mang! ?✌?
 

spyralout

🌱🌿🌲🔥💨
Staff member
Administrator
Moderator
Just thought I’d chime in on the squeeze part while hot. Take a couple large spoons and place the cheesecloth or screen between them and squeeze with the spoon handles. Saves your fingers from the burn. How’d the car repairs go @spyralout . Bro, you can always holler at ya boy for car troubles. It’s what I do mang! ?✌?
Good looking out mang. Gotta run the cycle before retest. I have a feeling I'm gonna need to change a couple more sensors. That obd reader is cool, but it's not as 'simple' like the old cars. Everything has a sensor, even a sensor lol.
 

Texagonian

CHOOSE YOUR TITLE
Good looking out mang. Gotta run the cycle before retest. I have a feeling I'm gonna need to change a couple more sensors. That obd reader is cool, but it's not as 'simple' like the old cars. Everything has a sensor, even a sensor lol.
Agreed. Sometimes technology is more of a pain in the ass especially when it comes to emissions. If I knew what your codes were I might be able to help. I have certain tools at my disposal that could be of use and get you to the root cause. Let me know if I can help. If you clear everything then like you said it’ll have to go through the readiness monitor cycle. Longest one to reach the readiness stage is the evap. Either way, let me know if I can be of assistance. I’d be happy to help.?✌?
 
Top Bottom