DemonTrich
In Bloom
This is a DIY to make your own clone shippers. For CHEAP! Actual clone shippers are $12-15 each, this DIY costs me 1.00 or less (total in materials), and is very comparable to the $$ clone shipper models.
At the start of the pandemic, cs were no where to be found, at least not less than 20 each (lmfao!). So I had to improvise. And it works beautifully.
Items needed
2x solo cups (same size)
1x 3" neoprene collar
1x small light
Shipping tape
Scissors
-Tape down neoprene collar to the bottom cup tosecure the dirt/roots during shipping.
-make 2 holes in the top solo cup to fit your light and slide the light in. (Ymmv on light used and how to secure it).
-slide top solo cup with light over clone foliage and tape it to the lower cup with the clone
-stick in 1gal bag and off ya go
At the start of the pandemic, cs were no where to be found, at least not less than 20 each (lmfao!). So I had to improvise. And it works beautifully.
Items needed
2x solo cups (same size)
1x 3" neoprene collar
1x small light
Shipping tape
Scissors
-Tape down neoprene collar to the bottom cup tosecure the dirt/roots during shipping.
-make 2 holes in the top solo cup to fit your light and slide the light in. (Ymmv on light used and how to secure it).
-slide top solo cup with light over clone foliage and tape it to the lower cup with the clone
-stick in 1gal bag and off ya go
Last edited:
