5 Gallon DIY Self Watering Planter

[Alexander]

Want to share this with everyone as a neat upcycled 5 gallon water jug into a self watering planter that has a capacity of about 2 gallons of water. Also as a bit of garden art.

I made a short series on tiktok showing build process. Really easy to do.




IMG_77632016×1512 554 KB


IMG_77601512×2016 344 KB


Overview

Build overview

Paint and fill pipe

Bit of art and end product

As long as protected from freezing these jugs last me about 4 years.

 

[Alexander]

Basically, chop off the top at the area shown in the pics. Then you flip the top and place it on the bottom. Add a piece of PVC tube to the handle as a fill tube. Have a drainage hole set about 3-4 inches from the bottom. Then fill with potting soil and plant.

Chop the top, grinder with a cutoff wheel works great.




IMG_78661122×698 84.8 KB


Perforated the top with holes.




IMG_78671049×720 52.6 KB


Flip the top, and place it in bottom as shown. Secure with a zip tie thru 1/2 inch drainage holes at the level shown by red dot.




IMG_78681091×670 46.5 KB


Add pvc fill port thru handle area




IMG_78691068×696 50.8 KB


Make sure to paint with a good spray paint that adheres to plastic, if you leave it clear algae growth will kill it, and the plastic will degrade much faster in the sun.




IMG_78701101×667 82.3 KB

 

[pepperpicante]

I like this!