Who loves fishing ?

My biggest was 95lbs and change...that was during a derby I won 2500. It took about an hour to land it, they pull hard!

Hopping for a Barn Door this weekend.
Wide And long....
1st prize this weekend 7k!!!!!!!!!!!

Damn bro that is a nice size fish! I've seen people catching them on TV, everything from regular fishing shows to the monster fishing shows seem to try them at least once. Apparently if you rub the lateral line on that fish, it calms them down so you can get a picture of it without harming it, which, given the footage I've seen of those being landed, seems like a huge task trying not to get hit with that big ol bone head LOL.

Good luck man!
 
Poor man's down rigger. These are one pound weights that have two Offshore Planer board releases attached with ball bearing swivels and split rings. These clip on the line counter rod/reel combo's we use when trolling for trout and salmon on Lake Michigan. Because down riggers involve using 15 pound weights attached to the 150 lb test steel cable. The down riggers are used when trolling to get the lures down to a depth where the fish are being caught. The problem with the heavy weight attached to the down rigger wires when trolling is that the wires give off an annoying hum when trolling at 1.5 to 3 mph, and this hum will often spook wary fish. These one lb weights attach to the line on the rod/reel combo after the lure has been let out behind the boat.

Let the lure trail behind the boat up to a hundred yards, and then clip on the poor man's down rigger weight and lower it to the depth that one wants the lure to be. Because of the lack of the hum that comes from a down rigger with weight attached, this rig will out perform the down riggers as they do not give off the annoying hum that a down rigger wire slicing through the water creates.

In hard fished ports, where everyone has down riggers giving off a hum that can repel fish in hard fished ports, the poor man's down rigger is the key to catching limits. We use these weights instead of the down riggers to get our lures down to the depths where fish are being caught, and because there in no associated hum from the down rigger wires and attached weights. These greatly out fish the down riggers and attached lures because there is no hum.

Simply reel the line the fish is on until one can grab a hold of the attached weight and unclip the weight from the line and then continue the fight until
the fish can be netted. With the the OR - 12 Offshore releases and split rings with ball bearing swivels, these cost about $25 to make one, but fileting a limit catch of salmon back at the fish cleaning station when everyone is bringing one or two fish to filet is priceless. Everyone wants to know where we caught them, but the question they should have asked is HOW we caught them. Well worth the money spent and the time making them up.


Poor Mans Downrigger 1.jpg


Poor Mans Downrigger 2.jpg
 
Last edited:
Not sure what the hum?..never heard it before?


I started my adventures on Lake Michigan when I got my first boat in '72, a lowly 14' Sea Nymph that had no business being out on such a large body of water. One had to watch the weather closely and pick very calm, cloudless days to venture out. My first boat had Luhr Jenson down riggers that used 10 lb weights, and over the years I progressed to larger and larger boats. I upgraded 4 times over the years to my present 20' Lund. Each boat was larger in size than the one it replaced.

The down riggers I've used over the years have had weights that ranged in sized from 10 pounds, then 12, then 15 and 16 pound weights. The heavy weights allowed the weight to track under the boat and be visible on the sonar as a line running across the graph. As the boat moves through the water at trolling speeds for the lures being trolled, the speed of the boat was usually between 1.5 mph to sometimes over 3 mph. When the weight was attached to the 150# test steel cable, the down rigger wires will hum a high pitched whine. If you have ever used down riggers, I'm surprised you have never heard what I'm talking about. Very noticeable in every boat I've ever had.

Now let's assume you've launched at a popular fishing port like Ludington, where on the weekends, hundreds of boats launch there and spend the day with their lures attached to the release at the down rigger weight. All of these down riggers in the water and the associated hum/whine the down rigger wire makes slicing through the water at the speeds I mentioned will alert fish to the boats presence. Some fish will move away from this presentation as the hum of the down rigger wire alerts them. This is why fishing my lures 100 yards or more behind the boat works better than lines that have lures close to the boat.

Knowing what the hum of the down riggers wires can do to move fish away from the passing boat makes presentations with planer boards and Dipsy Divers very effective. It allows one to present the trailing lures off to the sides of the boat. When a boat with humming down rigger wires passes over a school of fish, they will part off to the sides of the boat and this puts them into position for the lures trailing off to the sides of the boat with Dipsy Divers and planer boards, and not underneath as would be the case with a down rigger presentation.

I've attached a pic of some I caught using the poor man's down rigger weights, where most boats were only getting one or two. Sometimes it's the little things that pay huge dividends. These poor man's downrigger weights were made as a mother of invention. The first ones we made only had on release on them, and after having the weight fall off the fishing line from a fish that hits was frustrating. Landing the fish on which the weight was attached with one Off Shore release eased the loss of the weight, Off Shore release, ball bearing swivel, and O rings, but it still was painful on the wallet.

Sometimes a King Salmon also called a Chinook can attack a lure at up to 30 mph and this speed would sometimes cause the weight to fall off the fishing line it was attached to with only one release holding it to the fishing line. That is when we modified them for two releases and it solved the problem. I've been trolling for trout and salmon on the big lake for 54 years and I'm quite good at it.

Another aside for using the poor man's downrigger weights as they work on other lakes for other species. Lake Erie for walleyes, and another large inland lake called Higgins Lake where there are some very nice sized trout and these one pound weights work there as well.

I could write another long post about using a casting net for getting some alewife's which are the preferred bait fish for salmon. Basically get good at using a casting net. Cast for some alwife's or bring some fresh store bought smelt which are another preferred bait for salmon and keep them on ice.

Any lure that gets set behind the boat first gets slimmed up with the bait fish that salmon eat day in and day out. This slimming up our lures before setting them up for trolling behind the boat gives off the aroma they are use to homing in on with their incredable sense of smell. Parts per billion. Scenting up lures with bait fish they eat everyday probably quadruppled our catches. We figured this out in the early 80's as I used to launch my 16' Sea Nymph at a small creek called Stoney Creek. My partner and I would have our waders on and had a 4' tall x 15' long net stretched between two conduits of half inch EMT, and we would run down stream in this small creek at the mouth of Lake Michigan in the wee hours of the morning when it was still dark and net a bunch of alewifes.

We would put them in a bucket and throw some ice on them. This allowed us to scent up our lures with the fish they eat the most. Alewives are an andromonous invasive bait fish that migrated in from the Atlantic ocean and are now found in all of the Great Lakes. This species of fish was so prolific that they lined the shoreline of the Lake for miles when a die off occured, sometimes a couple foot high in the mid 60's and early 70's. The stench was horrific. As those with million dollars shacks along the shoreline started complaining to our DNR, they re-introduced salmon into our Great Lakes. The annual die off of these bait fish is what prompted our DNR to re-introduce salmon back into the Great Lakes. This was originally done in the mid 1800's and periodically over the years, but in the late 60's when the annual die off of alewives caused them to double down on thier restocking efforts. Because of the large number of bait fish in the Great Lakes, these salmon grew large and fat off the abundant supply of bait fish. A multi-million dollar fishery was born. I'm proud to say I've been in on it from the start.

Doctor Howard Tanner and Dr Wayne Toby were the two biologists from MSU that our DNR turned to, to get these salmon re-introduced to the Great Lakes. As a sidenote, one of our roommates when we first moved from our parents homes was the daughter of Dr. Wayne Toby.

They got some of the first plants from fish that came from Washington State and Alaska. A budding fishery that made millions in revenue for the State, not to mention the sales of boats designed for Great Lakes fishing.


QO1axyC (2).jpg
 
Last edited:
Cool.... Always good to see other techniques

We used to use a three-way swivel attached to a small cannonball (12 to 16 oz) attached to 24inch of half inch surgical tubing , to a swivel with a salmon leader with either a hook for a herring or a hoochie squid setup.
And set the drag lite, and troll real fast for coho...

I've got electric power with braid for DRs...

Thanks 👍
 
After an obnoxiously late spring, the river is finally fishable. It's low and dirty and there is still some ice along the south shores but I managed a pike and a walleye Tuesday evening and a good sized goldeye and a ~20" inch wallie on Wednesday morning. Can't wait to hook into the first dinosaur of the season.
 
Only one little walleye to show for the evening.
I also scooped this invasive species out and finished him off, as required by law.
5nbZbsojqooMLzO8dCG4zfsq9Le7KWCDscigTbIJ.jpg


Not certain, but thinking this is a lynx.
IUy0Q8HOi4Bv63qZFJgZm0mZWHsyBqTdYGBOxJ2r.jpg

osM6eS6WppSsDbh9RIwXyC93LNyhbP5R41UQ6Iqt.jpg
 
1 good fish in hand, is better than 1 in the water ;) that's a big ass crawdad...or looks like one, we used to catch crawdads and water snakes under the rocks in the river when I was kid...nice print too! Hopefully you still had a good day!
Fishing is great, catching is even better. :) After nearly a month of closed lakes and frozen river it's just wonderful to be out. It always starts slow while the fish get active and I get used to long rods and casting again. I expect to have at least a couple dinos before June, if history is a guide.

Yeah, crawdads, crayfish, whatever your preferred nomenclature. They are invasive in the North Sask River and are to be killed on sight. I've already scooped a few out this spring. That is one of the biggest I've seen. Made a nasty crunch.
 
Fishing is great, catching is even better. :) After nearly a month of closed lakes and frozen river it's just wonderful to be out. It always starts slow while the fish get active and I get used to long rods and casting again. I expect to have at least a couple dinos before June, if history is a guide.

Yeah, crawdads, crayfish, whatever your preferred nomenclature. They are invasive in the North Sask River and are to be killed on sight. I've already scooped a few out this spring. That is one of the biggest I've seen. Made a nasty crunch.

I wish crawfish were safe to eat. They're tasty, but not worth the risk of toxins like pesticides and mercury and parasites like lung flukes. The only way I'd eat them is in sauce Nantua, which is just the roasted shells infused into butter and then made into a bechamel.

Wonder if they're decent bait. It'd take all of 30 seconds to get those claws and tail out after a quick boil, and I'd have to think anything that would eat crab would be interested.
 
As a side note, it's good to see you back Amarok. We missed you. Tight lines bro.


We use to net them in the Grand River in Lansing at night. We had head lamps to light up the river at night when we netted them. We would chase them by flipping over smaller rocks and then with large rectangular aquarium nets, chase them with one net in front of them and as they propelled themselves backward through the water, the only direction that can go is backwards, and chase them into the other aquarium net behind them. Easy to catch at night.

The ones we were netting were more in the 2 to 3 inch size and unlike the picture of the large one you showed, were a dark brown color. I suspect that the ones you are required by law to kill, are a different subset of the crayfish species. There are many. The ones we were netting rarely reached 5 inches.

In the summer months when their growth is the largest of the year for them, they will shed their shell, called molting. This occurs during full moons in the summer months. The new shell takes a few days to harden up, but in the interim, they were perfect size and tender. We used them for targeting perch in the Great Lakes. Lake Michigan in particular. With 6 lb main line with an egg sinker on the main line, we tied this to a two way swivel. The leader was around 6 foot long and tied with two pound test and a small hook. The soft shelled crawdads were hooked through the tail and a long cast was made with the presentation. We would slowly pull this in with occasional pauses in the retrieve. Jumbo perch, many in the 16 inch class.

In lieu of not having some we freshly netted the night before, we would buy frozen ones at the bait store. When anchored and fishing on the bottom over the side of the boat with a bell sinker on the bottom and two dropper snelled leaders attached to the main line a foot and another at two feet up from the bell sinker, many doubles were caught. Fishing this presentation over the side of the boat was good for huge numbers as well. But some of our largest fish any given trip was done making the long casts and slow retrieve with the freshly molted crayfish.


Here is a pic of my long noodle rod bent over and when it bent like was the case in the pic, it usually meant that both snelled leaders had a fish on.
We would sometimes set the hook on the first bite and then wait 5 to 10 seconds for a fish to hit the 2nd snelled leader. Wham bam, double. Our
dropper rigs snelled leaders were baited with minnows and mayfly larva called wigglers. It was a rare day not to catch our limit.

When the rod bent like this, it usually meant a double was on.

Scan0138 (2).jpg

Perch, Bluegills and Walleyes are my favorite for the table in the same order. Perch are my #1.
7ee8b403e5cbab0abb3c49bd980f045aa98d37d0_2_690x404 - Copy.jpeg


Switching gears, the 7th to the 10th of April is when the walleye show up from the east end of Lake Erie. They number in the millions.
A very easy bite with a drifting and jigging presentation with minnows. We've caught some extremely large ones over the years, and
personal best was close to 14 1/2 lbs. and 34 inches long. Released to do her thing spawning.


Trenton channel of the Detroit River. Just upstream from Lake Erie. Easy limit of eyes. We try to throw back any over 5 lbs as the smaller ones
taste much better. After a limit of walleyes, we would then explore to cuts/channels on the lower end of Grosse Isle. The perch also show
up in huge numbers there to do their spring spawn. The perch always show up a week or to earlier than the walleye, but catching limits
of both species was a treat when it came to good eating fish.
Scan0128 (5).jpg


Scan0167 (2).jpg


YnWsxZx (3).jpg

This pic was from my early early years fishing the lower Detroit river before we started our catch and release the
larger ones and keeping those that were under 5 lbs. One of these weighed 12 3/4 lbs and the other weighed 12 1/4 lbs.
I feel guilty looking at this pic, as both fish were females and filled with eggs. Since the early 90s, we now let these big ones
go to do their spring spawn.
JHpILTu.jpg
 
Last edited:
Ran down to the river for a few hours this afternoon/evening. Talked to a regular who got a sturgeon yesterday. He had a slow day today and left shortly after I got there.

I managed 3 walleye and a goldeye. The wallies were small and the goldie was a tank.

I've caught a few fish on the Ambassadeur C3 since I put the new power handle on it and liked how it feels, but the proper test is fighting a dinosaur. This is the model I got. I threw one on my C4 as well.

1778464515495.png
Probably be back Tuesday evening and most of the day Wednesday. If the sturgeon are back in this stretch of the river, it's go time.

Morph Lets Go GIF by NETFLIX
 
Ran down to the river for a few hours this afternoon/evening. Talked to a regular who got a sturgeon yesterday. He had a slow day today and left shortly after I got there.

I managed 3 walleye and a goldeye. The wallies were small and the goldie was a tank.

I've caught a few fish on the Ambassadeur C3 since I put the new power handle on it and liked how it feels, but the proper test is fighting a dinosaur. This is the model I got. I threw one on my C4 as well.

View attachment 243731
Probably be back Tuesday evening and most of the day Wednesday. If the sturgeon are back in this stretch of the river, it's go time.

Morph Lets Go GIF by NETFLIX
Where are you fishing sturgeon?
 

Forum statistics

Threads
4,259
Messages
288,642
Members
2,326
Latest member
Bernadette&Reetha
Back
Top Bottom