Adding a rail to the substrate?

Deebs

The Sentient Naturewalker
Staff member
Moderator
Thinking about adding a rail with 3 cxb3590 to the current substrate used in a 3x3, with a separate meanwell hlg driver.

CHILLED LOGIC 3' X 3' LED GROW KIT

3x3_LOGIC_Kit__37668.1531852087[1].jpgLogic_3_x_3_Kit__58479.1567106185[1].jpg

I started wondering, new rail..... or cobs vertical on sidewall.
 

SSGrower

👨‍🔬
Go vertical!
20200229_083734.jpg
Try to run them low enough you can passively cool them, or have your normal circulation fans blowing on them. With 3 I would put them just below canopy level at about 25-30W each, depending on what your main light draws. Depending on your style think about adding a rack too.
 

Deebs

The Sentient Naturewalker
Staff member
Moderator
Go vertical!
View attachment 5204
Try to run them low enough you can passively cool them, or have your normal circulation fans blowing on them. With 3 I would put them just below canopy level at about 25-30W each, depending on what your main light draws. Depending on your style think about adding a rack too.
Not a bad idea, thanks for the insights ! I think I do like the vertical wall rack, gets more lights under the skirt, better development more than likely .
 
Top Bottom