TerpyTy The LightGuy

[TerpyTyrone]

Whats up my friends!?
I build these lights.
350 watt driver with 8 - 50 watt Samsung strips for 350$
Here is a veg light its number 4 for this friend. Ive sold more than twn of this,model. I use 14 gauge wire 6 ft long for driver input voltage. Then 16 gauge w heatshield to each strip. Wagos connectors and junction box.
I just ran out if screws. Im gonna grab a rivet gun and a can of white eggshell spray paint. I got some white riveta from work.
Thanks for stopping by!

@High kev @peacehead @Bustenbeans14 @Butlers ridge are all happy customers

 

[Bustenbeans14]

Terps light's are bringing the heat! No not literally ? but for real this is my first run with led I do have one cmh in the mix but honestly from running cmh for awhile I can noticed a huge difference in tricome and yeild.dont get me wrong cmh grows some killer flower but after seeing a strain iv run for awhile just blow up I'm sold af.

 

[TerpyTyrone]

Terps light's are bringing the heat! No not literally ? but for real this is my first run with led I do have one cmh in the mix but honestly from running cmh for awhile I can noticed a huge difference in tricome and yeild.dont get me wrong cmh grows some killer flower but after seeing a strain iv run for awhile just blow up I'm sold af.View attachment 74585View attachment 74586

Thanks for the recommendation brother!!

 

[jaguarlax]

Whats up my friends!?
I build these lights.
350 watt driver with 8 - 50 watt Samsung strips for 350$
Here is a veg light its number 4 for this friend. Ive sold more than twn of this,model. I use 14 gauge wire 6 ft long for driver input voltage. Then 16 gauge w heatshield to each strip. Wagos connectors and junction box.
I just ran out if screws. Im gonna grab a rivet gun and a can of white eggshell spray paint. I got some white riveta from work.
Thanks for stopping by!

@High kev @peacehead @Bustenbeans14 @Butlers ridge are all happy customersView attachment 74581View attachment 74582View attachment 74583View attachment 74584

Lookin good buddy, have you gotten a PAR sensor underneath to see what the spread is like?

 

[TerpyTyrone]

Lookin good buddy, have you gotten a PAR sensor underneath to see what the spread is like?

Im working on it.
@Bustenbeans14 has a friend with an hlg specR 600w. He says these are right on "par" with them. The main design ive been using is 22" x 34"
They're perfect for a 4x4 veg and 3x3 flower.
Im sure 400 watts would flower a 4x4.

An average LED lighting system draws about 32 watts to serve 1 square foot of grow space. The wattage in a grow room could be amplified up to a maximum of 50 watts per square foot. Going beyond that amount would create a too strong indoor plant light intensity, which could stunt the growth of your plants.

 

[Bustenbeans14]

Lookin good buddy, have you gotten a PAR sensor underneath to see what the spread is like?

Yup they can push an average of 1100 PAR at 345 watt's I run them softer like 250 and hit 750/800 average over the lights foot print also it's the Apogee 500 so I know the numbers are correct. @Rocman91 came over and helped get these strip to where they need to be Ppfd wise.

 

[TerpyTyrone]

Yup they can push an average of 1100 PAR at 345 watt's I run them softer like 250 and hit 750/800 average over the lights foot print also it's the Apogee 500 so I know the numbers are correct. @Rocman91 came over and helped get these strip to where they need to be Ppfd wise.

I'm so glad for this community. Your all my brothers!

 

[Meatman]

I can say the strips are awesome I use the same strips with great results if your in need of a light definitely hit @TerpyTyrone up for a light they are the best bang for your buck for sure

 

[TerpyTyrone]

I can say the strips are awesome I use the same strips with great results if your in need of a light definitely hit @TerpyTyrone up for a light they are the best bang for your buck for sureView attachment 74674View attachment 74675View attachment 74676View attachment 74677View attachment 74679View attachment 74678

Thanks brother!
I really do enjoy building lights. If I could do what Peter does for a living, I would.
These are the future.
They are building a polytexhnic university by me, Cree, and a chip plant for manufacturing. Its a 1B$ project. 500 acre site.
They are gonna be teachung our youth how to make, build, and program these chips
Oh and my state went legal, so I can openly advertise my lights and consultation services.

 

[High kev]

Soon I will be coming for many more lights. I just need to make sure the new spot is legit first
You working on any designs to cover a 5x5.

 

[TerpyTyrone]

U know I can! 46 inch heatsinks 25sf x 32w = 800w. Perfect. 2 fixture setup

 

[Butlers ridge]

Terps light's are bringing the heat! No not literally ? but for real this is my first run with led I do have one cmh in the mix but honestly from running cmh for awhile I can noticed a huge difference in tricome and yeild.dont get me wrong cmh grows some killer flower but after seeing a strain iv run for awhile just blow up I'm sold af.View attachment 74585View attachment 74586

I hope to be on this level soon

 

[Butlers ridge]

And yes i am pumped about the light here is a very nice super skunk under your light

 

[TerpyTyrone]

And yes i am pumped about the light here is a very nice super skunk under your light

Thanks for the recommendation brother!!!

 

[TerpyTyrone]

Check out my bro, chooping down the tombstone!!
And a shot of twinkle tarts. Frosty Af!
I you dont believe LED finish faster, your mistaken.
Thanks for letting me share @Bustenbeans14

 

[TerpyTyrone]

In this twnt 2 TerpyTy fixtures and one 315 cmh over 50 sq ft. Impressive!!

 

[TerpyTyrone]

My 240 watt 54v HLG Qb96 is shining on my bench as I use rivets on my latest lighr build. I took my brother @JL2G's advice. The difference between this method and the self tapping screws is definitely noticeable!

 

[JL2G]

My 240 watt 54v HLG Qb96 is shining on my bench as I use rivets on my latest lighr build. I took my brother @JL2G's advice. The difference between this method and the self tapping screws is definitely noticeable!View attachment 77811View attachment 77812View attachment 77813View attachment 77814

Looking nice and clean, sweet progress mang.
Love seeing where your headed with this. Good shit for sure. Love the LED tech, one of these days I may get back into building a few more. Lol. I'll just watch and admire for now. ???

 

[TerpyTyrone]

Looking nice and clean, sweet progress mang.
Love seeing where your headed with this. Good shit for sure. Love the LED tech, one of these days I may get back into building a few more. Lol. I'll just watch and admire for now. ???

I was gonna do an all white one. But we're doing tens and Saturday's. These are for a show this Sunday. I'm hoping there big some LED enthusiasts that have to have em, and possibly some leads pn future builds in my area.

I did 4 2700k strips and 4 2700k w added reds. I staggered them to ensure even red spread.

I can't wait to try @Bustenbeans14 and @Rocman91 ice cream cake pheno , oh Ang @High kev philosopher shrooms haha

 

[Rocman91]

I'll trade you some bud to help me put my light kit together lol???