Gweedo's Growroom

[Gweedo's Growroom]

Well been a busy bee upping our fleet of off-road vehicles, I'll get a pic update up tomorrow, gotta finish my murder cart today, plan on getting ripped and riding it all day tomorrow for my birthday, lol I'm easily amused ???

 

[Gweedo's Growroom]

All this ugly Fab work was done under the influence of some very potent 1 day cured lvtk x dbb thanks again Mr eso


Also had me so motavated I finally finished my Craftsman 33 gal compressor smoker 100% recycled material minus the bolts lol worked pretty dam good on some 4th of July brisket smoked it with cherry wood 6hrs and donsky, this was my first major welding project 90% done with fluxcore then upgraded to mig gas, wish I had it the whole time ??? just gotta paint her up now

 

[Smokieokie]

@Gweedo's Growroom I feel ya on the go karts and off road toys, I gotta get my kids some soon. Enjoy your day my friend, smoke some meat smoke some weed and have a happy birthday.

 

[HydroRed]

All this ugly Fab work was done under the influence of some very potent 1 day cured lvtk x dbb thanks again Mr eso
View attachment 16686 View attachment 16687

Also had me so motavated I finally finished my Craftsman 33 gal compressor smoker 100% recycled material minus the bolts lol worked pretty dam good on some 4th of July brisket smoked it with cherry wood 6hrs and donsky, this was my first major welding project 90% done with fluxcore then upgraded to mig gas, wish I had it the whole time ??? just gotta paint her up now
View attachment 16688 View attachment 16689 View attachment 16690 View attachment 16691 View attachment 16692

Compressor tank smoker with a flexplate tray....nice touch!

 

[spyralout]

All this ugly Fab work was done under the influence of some very potent 1 day cured lvtk x dbb thanks again Mr eso
View attachment 16686 View attachment 16687

Also had me so motavated I finally finished my Craftsman 33 gal compressor smoker 100% recycled material minus the bolts lol worked pretty dam good on some 4th of July brisket smoked it with cherry wood 6hrs and donsky, this was my first major welding project 90% done with fluxcore then upgraded to mig gas, wish I had it the whole time ??? just gotta paint her up now
View attachment 16688 View attachment 16689 View attachment 16690 View attachment 16691 View attachment 16692

My bro has one almost exactly the same that he welded using a bigass propane tank he got from work, the same size, all vertical, with racks, huge recycled temp gauge n everything like you have. Good job man ?

Happy birthday. We have something in common this month (other than bombass weed lol).

 

[GCG]

Happy belated birthday. Hope that murder cart didnt live up to the name.

 

[horribleherk]

Well been a busy bee upping our fleet of off-road vehicles, I'll get a pic update up tomorrow, gotta finish my murder cart today, plan on getting ripped and riding it all day tomorrow for my birthday, lol I'm easily amused ???
View attachment 16677 View attachment 16678 View attachment 16679 View attachment 16680 View attachment 16681 View attachment 16682 View attachment 16683 View attachment 16684 View attachment 16685

That's cool stuff are those carbs mikunis or keihins ! I've got a couple of Chinese quads I'm gonna fire up for the back yard both victims of ethanol gas the larger quad has a c/v carb that is really problematic older quads & 3 wheelers you could access the carbs mine is buried under bodywork I seen one of your older Briggs motor had the old school diaphragm carburetor on it those were good

 

[horribleherk]

Compressor tank smoker with a flexplate tray....nice touch!

cow or argonne ? I'm gonna build an ugly drum smoker soon I smoke salmon & have a sausage stuffer & grinders too

 

[Gweedo's Growroom]

That's cool stuff are those carbs mikunis or keihins ! I've got a couple of Chinese quads I'm gonna fire up for the back yard both victims of ethanol gas the larger quad has a c/v carb that is really problematic older quads & 3 wheelers you could access the carbs mine is buried under bodywork I seen one of your older Briggs motor had the old school diaphragm carburetor on it those were good

They are assorted eBay knockoffs in 19mm 20mm and 22 mm, the Tecumseh 6 hp has a 19 on it and my Briggs intek the red cart has a 22mm on it, really easy to tune once you know what your doing, and that pulsejet carb works great on the pavement but absolutely hates going hard on bumps, but no BS these engines really wake up once you carb em they don't fuck around ??? the red cart was pulling the inside wheel up coming out of corners lol and it needs tuned on hard, the intake I made is long and the carb is big so she rips up top but isn't a fan of wot from a stop, needs more compression and a hotter plug methinks,

 

[Gweedo's Growroom]

And the welding I did was fluxcore with no gas at first .30 wire then mig with .30 wire and 75/25 co2 argon, I'll never use fluxcore again unless I'm out in the wind ??? mig is so much more controllable on the small stuff

 

[Gweedo's Growroom]

And quick short update
Been trimming for the last week about 3 hrs a day almost done with the four I chopped, still got another late bloomer in the room and the gfunks are about 3 weeks out from chop, and the murder cart definitely lived up to its name, unbeaded and shredded a tire after about ten mins of hard flogging ??? 4 plys ennroute now ???

 

[Gweedo's Growroom]

Update time
Rooms down to the 6 g funks, chopped the last obsm x lvtk on Friday trichs finally went milky about day 72 longest flowering lady I've had to date ??? the five ladies I trimmed up netted 12ozs total Jarred and curing now??? and also got about a half a pound of frosty ass popcorn and sugar trim gonna need 20 gallons of everclear to process it all ???

The ladies in the room are at weeks 6 and 7 now, hit the upper limits of feed and cooked some tips AGAIN lol no beauties this go but they do still look tasty AF

Week 7 on these 2
Feed dropped to 550ppm till the end they had hit 1100 a while back and didn't enjoy it, did a full Rez change soon as I noticed but it happened fast, so it goes in hydro??? one is a little further along than her sister and may get axxed Tuesday, been scoping them and she's starting to go all snow White on me, super sweet and skunky on the nose and stiiiiicky

 

[Gweedo's Growroom]

And here's a few of the slightly younger siblings, they're a bit stunted from having to share a light with the monster that was tied up next to them, but they're also coming along quite nicely, everyone's got some form of bondage going on as well they all had branches trying to bend in half, and the branches are nice and healthy not no spaghetti limbs ??? thanks to @Phylex for giving me the opportunity to run these beans, they've been quite un eventful throughout their lives, and I'm sure most consider runs with no special needs a major plus ???? ???

And the biggest lady I've had the non pleasure of growing indoors, like wrestling with a wookie I'd imagine, countless un planned hot showers from it attacking me with random branches ??????
Rest in peace

 

[Phylex]

I greatly appreciate your time and space invested in helping me with testing the Galactic Funks. Hopefully you'll find something in the group that fits the smoke you enjoy too. Much love brother and thank you for the support.

 

[Gweedo's Growroom]

Pic drop incoming all from this morning, GFunk aromas and frost have arrived ??? they all have a very sweet citrus/punch nose on em now

Week 8 day 56 tomorrow on these 2

 

[Gweedo's Growroom]

Same plants different lighting

 

[Gweedo's Growroom]

Rooms gonna be emptied by next week id imagine, gonna do a full clean out then begin working on my own creations, being around all these pollen chuckers has most definitely rubbed off on me, first up will be mendo purps(csi Humboldt) x white rhino (aka medicine man from Mr nice) I absolutely love the purps, if I can keep the earthiness it usually has and up her yield and potency a bit with the rhino I'll be a happy camper, after that it's gonna be lemon og(DNA) x Hindu Kush( kiwi seeds) hoping for some citrus mixed with Earth and some Hindu size traits, gonna be a fun and interesting project for sure, may yield some fine smoke as well ????

 

[GCG]

Rooms gonna be emptied by next week id imagine, gonna do a full clean out then begin working on my own creations, being around all these pollen chuckers has most definitely rubbed off on me, first up will be mendo purps(csi Humboldt) x white rhino (aka medicine man from Mr nice) I absolutely love the purps, if I can keep the earthiness it usually has and up her yield and potency a bit with the rhino I'll be a happy camper, after that it's gonna be lemon og(DNA) x Hindu Kush( kiwi seeds) hoping for some citrus mixed with Earth and some Hindu size traits, gonna be a fun and interesting project for sure, may yield some fine smoke as well ????

Nice plan finally kicking into motion. Good luck, I like your building blocks. Nice potential in there.

 

[horribleherk]

They are assorted eBay knockoffs in 19mm 20mm and 22 mm, the Tecumseh 6 hp has a 19 on it and my Briggs intek the red cart has a 22mm on it, really easy to tune once you know what your doing, and that pulsejet carb works great on the pavement but absolutely hates going hard on bumps, but no BS these engines really wake up once you carb em they don't fuck around ??? the red cart was pulling the inside wheel up coming out of corners lol and it needs tuned on hard, the intake I made is long and the carb is big so she rips up top but isn't a fan of wot from a stop, needs more compression and a hotter plug methinks,

I'm in cen- called they used to have special go cart races for r-worked flathead 5 hp Briggs motors they used to mill the heads & have special flywheels with offset keys to advance the timing ran mikunis on dirt bikes they are easy to tune

 

[Gweedo's Growroom]

Chopped all the ladies but the tangie leaner this morning, they were at 7.5 to 8.5 weeks , trichs we're all turning creamy on me but still had a few fresh pistils popping, coulda been the lights being too close, so mucho trim jail again ??????