Valley View

[DopeDaniel]

I probably should have waited at least a week more before chopping the TTLT, testers are smoking good but yield suffered. There may not be enough for testing, certainly not if I keep "smoke testing" them.

GG4s1 x Tomahawk

Two more weeks probably, there is a tester lower hanging. The trichomes look so organized.

 

[BH]

That fire!

 

[DopeDaniel]

45F here this morning 80 is not out the realm of possibilities this afternoon. I haven't watered the in ground plants for about 3 weeks now, but today might be different, it hasn't rained in about 3-4 days.

Most everything outdoor has been topped, I am under the size restriction of "They are fine as long as they don't get "too big"".

 

[DopeDaniel]

This is where I am going to have my testing done.

The Good Lab

Quality cannabis lab testing for the people!

goodlabcolorado.com

 

[JL2G]

45F here this morning 80 is not out the realm of possibilities this afternoon. I haven't watered the in ground plants for about 3 weeks now, but today might be different, it hasn't rained in about 3-4 days.

Most everything outdoor has been topped, I am under the size restriction of "They are fine as long as they don't get "too big"".

Really though, how big is too big?
I've grown some 5 footers that were dwarfed by a buddies outdoor monsters. So in essence the 5 footer was tiny imho. ???

 

[DopeDaniel]

2x red tail hawk fledglings are out of the nest waiting for first flight.

1x ball o' nanners found while trimming up GW x CnC for harvest, choped yesterday just past 9 weeks. It was a preflower that fliped the switch, not unexpected after the light leaks (I left the ac infinity display on again too).

4 males pulled from the NH crosses, the f2's are slower to show. I will start transplanting females today after preping SKVA for chop.

The ak47 x vanilla gorilla will probably be next then the GG4s1 x Tomahawk will be last probably just over 10 weeks.

 

[DopeDaniel]

Identified 4 females and 2 more males on the NH crosses but thsta as far as I got on that. Decided to work on getting ready to work on the greenhouse.
I dropped and bucked up the tree probably a week ago, leaving the stump to deal with. I could have rented a grinder but that would require about 3hrs of driving and 45 minutes of interacting with people, fuck that.

Thinking I will build another platform kinda where those logs are for the
"foundation" but I am not sold on the final location yet. I've heard lumber is coming down in price, any truth to that @JL2G

 

[MO_Grow]

Ya...driving all that time, then having to interact, and then driving all way back...ya, fuck all that, lol!

I'm not in on the trade but I have been catching wind that lumber is coming down here shortly/lately also. Despite everything else that's been in either demand or shortage that's continuing to rise. But I've heard anecdotal support to the idea from coworkers recently...so hoping there's some truth to it.

 

[JL2G]

Identified 4 females and 2 more males on the NH crosses but thsta as far as I got on that. Decided to work on getting ready to work on the greenhouse.
I dropped and bucked up the tree probably a week ago, leaving the stump to deal with. I could have rented a grinder but that would require about 3hrs of driving and 45 minutes of interacting with people, fuck that.
View attachment 74915 View attachment 74916
Thinking I will build another platform kinda where those logs are for the
"foundation" but I am not sold on the final location yet. I've heard lumber is coming down in price, any truth to that @JL2G

Cost of wood is coming down some, but I've also heard its a bait n switch.
Just some feedback I've heard about it, only time will tell. Lol
What I've heard is it's a temporary drop to get folks building projects started, then once shits in progress and no choice to continue the prices will jump back up.
Sounds jenky right, but it also sounds like shit that would happen.
But yeah, short answer is they're down some for now. Lol.

 

[DopeDaniel]

5x NH cross females transplanted and one more male culled. Suspect 2x NH F2 female should have everything sexed by next weekend. Thinking I will do a mid flower uppot to some 1ish gallon pots.

Put 6 of the trespassers in a clam shell light dep rig, I hope if I can keep it up for 4 weeks they will be able to stay in flower.

 

[DopeDaniel]

I did a yucca, silica, fulvic mineral foliar for the first time in a bit, in fact I haven't done an ipm spray in about a month. I can't let that complacency continue. The strawberries, trespassers in light dep and NH f2s and crosses got sprayed. I didn't reduce the amounts from what I used before (2.5ml per mineral) like planned, not sure why I did that. I was behind on foliar applications, pest pressure is increasing.

 

[DopeDaniel]

First flight was a few days ago for this one. One of the parents brought in breakfast shortly after this shot. I got some pics with the telephoto, I'll try to get them downloaded in a bit.

 

[DopeDaniel]

I was gonna do some watering but guess I'll download those pics, gardening doesn't feel safe during ipm.

 

[DopeDaniel]

@jaguarlax , @Deebs I am downsizing images to less than a meg and still getting message image is too large for upload? Using gimp2.1 and just exporting with lower image quality. Any tips?

 

[jaguarlax]

@jaguarlax , @Deebs I am downsizing images to less than a meg and still getting message image is too large for upload? Using gimp2.1 and just exporting with lower image quality. Any tips?

The limit is much higher than a MB, I’ll poke around a bit and see if I can dig anything up about this bug.

what is the default file type you are uploading to? Could it be something the platform doesn’t recognize? @Deebs

 

[Deebs]

Will have to be tested in proto, but I think there is a configuration to set pixel count in the config.ini. Will need to research that a little.

$config['maxImageResizePixelCount'] = 20000000;

 

[jaguarlax]

Will have to be tested in proto, but I think there is a configuration to set pixel count in the config.ini. Will need to research that a little.

$config['maxImageResizePixelCount'] = 20000000;

So the image size error message isn’t file space, it’s the pixel count?

 

[Deebs]

Just something I read.

XF 1.4 - The uploaded image is too big. The uploaded file is too large.

Getting this error when trying to upload an image file. I have seen several similar threads on this topic, but none that have a definitive answer. We are on a dedicated server and have completed control over it. We have limited file sizes to 3600X3600 and 3Mb. When I try to upload an image...

xenforo.com

 

[DopeDaniel]

So the image size error message isn’t file space, it’s the pixel count?

This could be. Camera is a full frame image size is 6000x4000 iirc there is a feature in gimp to resize that way, otherwise I'll just crop the pic so it fits those limits.

 

[DopeDaniel]

Resized fro. 6000x4000 to 3000x2000. Ready for breakfast? thanks @Deebs and @jaguarlax