Jewels’ SCROAT Show

[Jewels]

I think I am learning a thing or two. I saw something today, and I believe that I recognize.
It was this.

This entire room is closing in on seven weeks. Looking for finishing signs, I began my search with the familiars, Affie, Rombrothers and Jack.
Found within the red mark, I have circumscribed my initial finding.

Looks like she is ready to puff up. Early growth is much more obviously shaggy to me now. I try to pay attention.
They seem to turn in, harden up, batten hatches, swallow their tongue.
Could we call this the end of puberty?
With new infrastructure no longer being built, does the new focus: ripening, begin?

I am curious about the natural fertility cycle here. May I compare the cycle to an orchard tree?
Spring blossoms are fertilized, seeds develop inside the fruit. No pollination= nonfruit.
With cannabis, a pistil is looking to be fertilized, with no luck the bud develops regardless. A mass of barren wombs. It is not fruit, but I like the fuzz.

Can we agree on the facts so far ?

My curiosity is -what is my bud doing now? What is the purpose of pumping weight into a failed investment? If I am not seeing new white pistils , what is the purpose ?
Just to dumb to die ?
Snake do that, I have more faith in the weed.

Any how. It started with the Affie.
And it started right here.





Ground pounders tucking in tight.

This was the andriod trick I was telling youspeople aboot.
Instead of pressing the shutter button; Press on the image in the viewfinder. It will focus where you tap.
An Lg will fire the frame with a screen tap.
A Samsung will focus where you tap and only shutter with the button.

Same vantage. Differing focal point.

Compare now to Sour Tangie crosses.
They are still in it to win it.
Identical feed. Just longer weed.

Crockett
Shy F2

Now that is classic Tangie, right there.
That is what I go to sleep dreaming about.

She is just burnt enough to let her know who is boss.

 

[Jewels]

Some folks are into that.

 

[TerpyTyrone]

That is a HUGE swing. Witch crushing weather fo so.
Hey @TerpyTyrone dint @highkev ( wtf?) have that purple going on an outdoor last year ?

And damn it @highkev , where'd you go

? ?

Ya that purple shit is in our region..... Bummer dude. They look ok though....

 

[GthaEnigma]

the sparkling ladies look amazing jewels. You are doing those Ground Pounders proud. well done sir.

 

[DopeDaniel]

With new infrastructure no longer being built, does the new focus: ripening, begin?

Facts are subject to interpretation and reliant on full omnipotent knowledge.

Perhaps you will be curious to observe lunar cycles (all of them). One for refernce here in the waxing and waning, exhale vs. inhale. It is no wonder to me any copetent breeder can nail a 2 week harvest window, regardless of when the cultivar goes into flower it will allign so the 2 week window is always accuerate imo (nonomnipotent) it is dictated by nature.

 

[DopeDaniel]

Autofocus lock omfg. Perhaps you can assist me with my newest issue - downloading a new keyboard because the most recet update has caused the delete and enter keys to occasionally make it dissaper dissapear (easier to retype thand to do the delet thing) notice I am leaving typos more?
Edit alternatively idf there is just a setting i need to change or someting....

 

[Jewels]

Touch grids can be damaged and glitchy.
Can you doodle a smooth line over the suspect areas ?
Could be bad coms.

I don't like after market software.
Consider, on a 'Free' platform, the user has become the product; not the app.

 

[Jewels]

curious to observe lunar cycles

Yes, lay it on me , bro.
I got a seed knot in my belly.
Dying Grass Moon starts in 11 hours.
Tell me when to put it down, then I can give you all the credit,,, er coughcough, blame.

 

[TerpyTyrone]

Ya that purple shit is in our region..... Bummer dude. They look ok though....

@High kev
I brought the ghost of kev back!!

 

[Jewels]

I thank ya for it.
I figured he was still hunched over walking backwards , sowing a line clear to the coast.
Kinda lika Kane/johnnyAppleseed/Forest Gump endeavour.
The Dude grows bud like it is going out of style.

 

[DopeDaniel]

Yes, lay it on me , bro.
I got a seed knot in my belly.
Dying Grass Moon starts in 11 hours.
Tell me when to put it down, then I can give you all the credit,,, er coughcough, blame.

Mondkalender Astrologie - Kostenlose Berechnung online

www.astrologie-info.com

That calendar is ok but it dosent have perigee / apogee on it. I prefer planting/germinating/harvesting focusing on perigee and northern node. Of course they rarely align so the compromise is up to the end user.
It is the stock keyboard. I don't think it's related to the touch mechanism nor is it related to the screen damage (still waiting on response if speaker is included with the front frame)
The buttons activate fine it will either delete or return carriage but then the keyboard goes away. It seems to be less prominent when I am typing in the middle of a string of characters but that is no guarntee. The letter I seems to be working real weel well but I just tried to use it there and gur guess what the keyboard disappered (.i tried to do a screen shot a doodle on it but the doodle window is above the where the delete and enter keys are (lower right) damage is lower left.

Also just tirned on floating keuboard and same effect with the two keys but again not always.

 

[Jewels]

Not sure dude. I am mostly nuts and bolts.
Try disabling 'gestures' .

A swollen battery can give you trrrrrriple letters. Can also close or open windows.

Not sure what to suggest. Allow auto-updates, they are always tweaking stuff like that.

 

[DopeDaniel]

NP buddy, found this video for walking me through the process of getting the frame replaced.

After rewatching it, it dosent look like the speaker is glued down in this one or at least it pops out pretty easy. The ifixit video for battery replacemnet was helpful too because it outlines the location of the adhesive for the back cover.
Forecast for next has been steadily declining at first snow at 11K, then 10, now 8. Looking like tuesday night, but still near 27 this weekend and back to summer by the end of the week. Deck dwellers will be hiding out in the garage so I need to make some accomodations today.

 

[Jewels]

it dosent look like the speaker is glued down

Brace yourselves,,,
I qualify nearly every post with a disclaimer that I am only speculating. The following statements are not speculation !
I have thousands of hours on Samsung repair-
allow me to disseminate
I saw dozens of careless errors in this video. I I did a repair like that , I would be replacing that phone, there were many FATAL errors.
@ 30 secs- never take a heat gun to an AMOLED front.
@41 never pry on a beveled edge- always on flat planes
@48 never put a metal tool on a batterycover.
@55 - again from the corner !
@1:00 never apply acute force.
@1:01 Never spot heat.
Gott tired of writing.

I see adhesive on battery and induction pad. This is evidence of contact. Either action can destroy those components



Never apply acute force to a battery


See the stress wrinkles? That battery is F’d

NEVER contact a PCB with a metal tool, that single action could have killed the phone.


Again, steel on board.
Do not disconnect the antennae!!! That is old school co-axial. Apple glues them down. That connect is SOOoO fragile. Disconnect the port connection only. The antennae wire is double female. The male side of the connection loves to fall off the board. If the port connection fails on the daughter/portit can easily be replaced. If the button comes off the motherboard, the microsoldering shop will charge at least $100 to reattach them.

Moving parts are rare in cell phones and the mostly like to fail. Those lenses are soft, and they cannot be cleaned. There was no need to remove it from the board in the first place! It was exposed long enough to become mechanicly and optically compromised. I could see the scratches in the bezel , even after phone was reassembled.

Dose bastards! Absolutely he destroyed the ear speaker.

This is a replacement aftermarket part! Regard the film , protecting the new adhesive. That white shiny square needs to be removed to expose new gum.

I don’t like the way this guy drags his tools over connections and the board it self. The photo below explains why this phone will drop calls after the repair

 

[DopeDaniel]

Brace yourselves,,,
I qualify nearly every post with a disclaimer that I am only speculating. The following statements are not speculation !
I have thousands of hours on Samsung repair-
allow me to disseminate
I saw dozens of careless errors in this video. I I did a repair like that , I would be replacing that phone, there were many FATAL errors.
@ 30 secs- never take a heat gun to an AMOLED front.
@41 never pry on a beveled edge- always on flat planes
@48 never put a metal tool on a batterycover.
@55 - again from the corner !
@1:00 never apply acute force.
@1:01 Never spot heat.
Gott tired of writing.

I see adhesive on battery and induction pad. This is evidence of contact. Either action can destroy those components

View attachment 24024

Never apply acute force to a battery
View attachment 24025
View attachment 24026
See the stress wrinkles? That battery is F’d

NEVER contact a PCB with a metal tool, that single action could have killed the phone.
View attachment 24027

Again, steel on board.
Do not disconnect the antennae!!! That is old school co-axial. Apple glues them down. That connect is SOOoO fragile. Disconnect the port connection only. The antennae wire is double female. The male side of the connection loves to fall off the board. If the port connection fails on the daughter/portit can easily be replaced. If the button comes off the motherboard, the microsoldering shop will charge at least $100 to reattach them.
View attachment 24028
Moving parts are rare in cell phones and the mostly like to fail. Those lenses are soft, and they cannot be cleaned. There was no need to remove it from the board in the first place! It was exposed long enough to become mechanicly and optically compromised. I could see the scratches in the bezel , even after phone was reassembled.
View attachment 24029
Dose bastards! Absolutely he destroyed the ear speaker.
View attachment 24030
This is a replacement aftermarket part! Regard the film , protecting the new adhesive. That white shiny square needs to be removed to expose new gum.
View attachment 24031
I don’t like the way this guy drags his tools over connections and the board it self. The photo below explains why this phone will drop calls after the repair
View attachment 24033

See kids, this is why you go for confirmation when you find something on google. Thanks @Jewels I will put the machinists gap tool away and source something else. Looking around there is an ifixit kit (has the sand bag and tools) with battery for 40 bucks, Galaxy S8 Replacement Battery
Considering getting this, replacement speaker (still havent heard back on if its in the from frame) and the frame for my repair. I dont need the battery mine still has good life but I have seen a reduction and intend to keep the phone a few more years barring a successful repair.

 

[Jewels]

Not done yet. Need more photo’s.

WTF? I cannot stress how fragile these contacts are.
This single action could kill a phone.

He F’d the display. See that gold shimmer?

Congratulations.
This phone now has low signal , or no wifi

Let us revisit this photo. It’s is very important to bed those blue and white wires BEFORE bedding the motherboard . See how they route under the board? You can’t push a rope.
By leaving the board side wire connections actattached, the wires retain accurate memory ( correct shape) and are more likely to fall into the channel correctly and make this procedure more manageable.
As narrator mentions. Port connection first.
Then use your right hand to keep the wires behaving ( see them diving under board ?)
This is one of the trickier procedures. Jiggle and route other connections out of the way , whilst the board beds properly. This is the “satisfying ‘click’ “ I mentioned earlier. We are talking micro millimetres tolerance. The board should seat snug and proper. No rocking!!
Beware of trapping connections under the board as you lay it in , from the bottom up.
You will need to arch the front facing camera in order to tuck the TOP of the camera in first. After seating the face cam. The board will naturally fall into place.
After landing the board, Then connect blue and white jumpers.



Errrg , More acute pressure. Those connections are soldered on tinfoil, lift enevenly or seat unevenly and they are F’d.
Gonna have to grow a ”coke nail” @SSGrower You may lose dignity and respect, but your phone will thank you for it.
Fingernails only to break connections.
Fingerprints only to seat connections.

Rather than pivoting. Hold the battery cover parallels to body, seat by faith, squeeze from exterior. Connect will land itself.

Rant Paused.

 

[DopeDaniel]

Whew buddy take a brake, didn't mean to get ya worked up. But dayum lots of flaws in one of the most popular videos.
We have time here havent ordered the frame yet....tester of tangie maybe?

 

[DopeDaniel]

Coke nails don't work well with clay. Have 2 pots to make today then.

 

[Jewels]

Some parts are dirt cheap.
Pixel is for my younger sister.
All Lg products purchased on speculation for my phone.
They don’t add up to shipping cost.

like buying seeds. You want to buy one in particular .Gotta scope around while you are there.

We have time here havent ordered the frame yet.

It will only get less expensive overtime.

Also , my keyboard disappeared 15 -20 times while composing this last post only.
Delete and return both hide keyboard. This is a legit interface issue.
You have Samsung. I am on LG.
Somethingbaint right her @spyralout

 

[DopeDaniel]

Hey something is changing.

I HAVEN'T noticed it making many typos on this post purpously. So did we now transmit somithing cross platform? You said the trans Canada highway was clean jewels.

@spyralout @jaguarlax thanks for fixing my issue but did we open a box?