NotAquaMan
In Bloom
Just look for what will look like white dust on the bottom after mixing.
I use jiffy pellets. Never an issue unless I have cooler temps. But I have to make sure that peat stays tight to the stem
Nothing Fancy
- Thread starter Caddis
- Start date
I use jiffy pellets. Never an issue unless I have cooler temps. But I have to make sure that peat stays tight to the stem
Caddis
Zinger
Well, you were right, after mixing to .6, had to ph down 6.5 to 6.2.
I’ve never gone this light on nutes, but trying it.
Mixing that light affects the ph, @ 1.0 EC it’s balanced.
NotAquaMan
In Bloom
Awesome glad it worked out... Yeah more nutes will almost always lower the ph.
Caddis
Zinger
Ha, I know that white slush your referring to, lol!
Make sure your cal-nit is mixed before adding to Part A & mag.
Caddis
Zinger
New digs!
The rooters didn’t have near the root development of the rw. I don’t really like it, but dang, sure does work good!
Just running the 288’s @ 18000 on lux meter. I'll kick the cobs on shortly.
Strips have some red, I don’t know whether to run them this soon?
I don’t need the white, plenty in the cobs and qb’s.
The rooters didn’t have near the root development of the rw. I don’t really like it, but dang, sure does work good!
Just running the 288’s @ 18000 on lux meter. I'll kick the cobs on shortly.
Strips have some red, I don’t know whether to run them this soon?
I don’t need the white, plenty in the cobs and qb’s.
NotAquaMan
In Bloom
Beautiful work bro... Oooh how jealous I am... I'm pumped to watch this grow out. Thats a well done system puts my ghetto buckets to shame lol.
Caddis
Zinger
Clone update
?
I posted this in your thread Spy.
The failure of the rooter clones is almost 100% lazy user error.
Pretty much what you said.
Pictures tell the story, collars pulled them up some too.
I should have patched the hole like you would with a seed. (
?
I posted this in your thread Spy.
The failure of the rooter clones is almost 100% lazy user error.
Pretty much what you said.
Pictures tell the story, collars pulled them up some too.
I should have patched the hole like you would with a seed. (
Attachments
Caddis
Zinger
It’s taken awhile. I wasn’t just beatin my meat in the bushes! ?
I probably don't get deep enough in the science, but fuck, we’re potheads!!
Not looking for a job. ?
The hole on a Rapid Rooter is much bigger than a Root Riot, so if you're using them to root skinnier stemmed clones, Riots would work better, and you would see roots sooner cuz of the smaller size of the riot. Since rooter is all you have to work with, the patch method would work too. Or flip upside down and make your own hole if not using a tray.
Caddis
Zinger
I tried the Root Riots, at the time I needed to split them and they were inconsistent for that.
Your right about being better for this.
I noticed a couple of those rooters pushed through, probably loosey goosey in the hole.
Story of my life.
Caddis
Zinger
Too bad the plants don’t know the difference. )
I bought a high powered Sata spray gun, didn’t make me a better painter! ?
I’m counting on you, I’m tired of guessing!
How high should I hang my light? ?
NotAquaMan
In Bloom
Lol true I mean you could grow out of a garbage pail. Hmmm if you did and cloned them would they be garbage pail kids?Too bad the plants don’t know the difference. )
I bought a high powered Sata spray gun, didn’t make me a better painter! ?
I’m counting on you, I’m tired of guessing!
How high should I hang my light? ?
Lol I still use an app to double check my light. It's called light meter by my mobile tools dev
Caddis
Zinger
After reworking the clones in the rooters, all is well.
Took most of the leaves off one that was laying over.
She’s standing up slowly.
Before
My Berry’s are in the f&d, not feeding.
Pretty slow, not sure I like leds for seedlings.
Going to move the 125w fluorescent that’s on the GP to these?
The exposed rw Berry is the winner of the Pheno Hunt, you can say you knew her “way back when
The fogger clones are still looking good, I don’t know how this works as hot as that water is? Starting to develop some nubs.
I moved the Grape Pupil in with uc.
I’ve decided the GP wants to be spread eagle against the wall, think I’ll accommodate her?
Still thinking about a trellis?
EC 1.4, 24C 6.2 ph
The uc is plugging along. I had to bump the nutes up. I have a hard time getting it to hold a stable ph when running light.
Bumped it to 1.2 yesterday.
Roots developing, lowered the water.
Need to set up my top off rez.
Plants still seem droopy, running just the 288 qbs 4K.
Ran the cobraise the heat, but too much light and didn’t help.
Running a heater in May? ?
Took most of the leaves off one that was laying over.
She’s standing up slowly.
Before
My Berry’s are in the f&d, not feeding.
Pretty slow, not sure I like leds for seedlings.
Going to move the 125w fluorescent that’s on the GP to these?
The exposed rw Berry is the winner of the Pheno Hunt, you can say you knew her “way back when
The fogger clones are still looking good, I don’t know how this works as hot as that water is? Starting to develop some nubs.
I moved the Grape Pupil in with uc.
I’ve decided the GP wants to be spread eagle against the wall, think I’ll accommodate her?
Still thinking about a trellis?
EC 1.4, 24C 6.2 ph
The uc is plugging along. I had to bump the nutes up. I have a hard time getting it to hold a stable ph when running light.
Bumped it to 1.2 yesterday.
Roots developing, lowered the water.
Need to set up my top off rez.
Plants still seem droopy, running just the 288 qbs 4K.
Ran the cobraise the heat, but too much light and didn’t help.
Running a heater in May? ?
NotAquaMan
In Bloom
Looking great man.
Caddis
Zinger
I saw you mention reverse differential,
wasn’t familiar, what a surprise huh? )
The diff isn’t very much (5 degrees), but wonder if you run 80 degrees during the day, run 85 @ night?
Run 75 degrees during the day, 80 @ night?
Am I looking at this right?
NotAquaMan
In Bloom
Even a negative 2 diff works well you can see the difference easily. There is even some studies that show creating the diff for just 2 hours before lights on is enough but I haven't tried that yet.
Caddis
Zinger
I don’t think I can control the environment that precise,
